Free Nokia 4A0-205 Practice Exam with Questions & Answers | Set: 2

NFM-T is a network management system designed to manage optical networks in a unified manner. It is used to design, manage, and provision optical services having IP nodes as extremities. It supports a variety of technologies, including optical and IP, and fully supports LO, LI, L2, and GMPLS applications. It is mainly focused on the Nokia 1830 PSS product family, as well as other older product families.

It can be implemented through the use of a Y-cable or an optical protection switch (OPS) card, which allows for the switching of traffic to a secondary path in the event of a failure on the primary path. This type of protection is commonly used to protect against fiber cuts and other types of physical layer failures in the optical transport network.

According to the Nokia Optical Networking documentation, a Shared Risk Group (SRG) is defined as "a set of network resources that share a common failure risk. When a resource in an SRG fails, the other resources in the group are also affected." This can include fibers, boards, nodes, and other network resources. The SRG concept is used in network design and protection mechanisms to ensure survivability and minimal impact on service in case of a failure.

A degree-1 node is a node that only has one direction, and it is therefore a terminal node. This means that the node only has one input and one output port. It does not have any other ports to connect to other nodes or fibers. This is a common feature of some optical transport networks, such as ring networks, where a degree-1 node serves as the endpoint of the ring.

The validate step in the EPT design process is used to trigger the run design action, which is responsible for verifying the consistency of the network design and fixing any errors that may exist. During the validation process, the system will compare the configuration available on the involved network elements and the design provided by EPT, and any discrepancies will be flagged for further investigation or correction.

The Metro Area Network (MAN) is a telecommunications network that spans a metropolitan area and connects multiple local area networks (LANs) or business networks together. It typically covers an area that is larger than a LAN but smaller than a wide area network (WAN). The purpose of a MAN is to provide a high-bandwidth, low-latency communication infrastructure for businesses and other organizations in a metropolitan area.

show interface 11starla 1/17/L1 detail is the correct command to check for interface details. This command will display detailed information about the specified interface, including its status, configuration, and statistics.