Free Nokia 4A0-103 Practice Exam with Questions & Answers | Set: 4

RSVP uses downstream on demand label distribution mode.

LDP uses conservative label retention mode.

LDP advertises label mappings to all peers for which it might be a next-hop for a given FEC.

RSVP distributes a label mapping for a FEC when it has been requested to do so.

The Isp-ping tool is used to perform a unidirectional LSP test.

The router 10.10.10.2 is the egress router of the LSP.

The router can reach the far-end of the LSP through an RSVP-TE tunnel.

The router can reach the far-end of the LSP through an LDP tunnel.

Label

Frame check sequence

Traffic Class (previously called Experimental)

Time To live

Bottom of stack bit

A separate label is used for each interface on which the FEC is advertised.

A single label is assigned to a FEC for all interfaces on the same router,

It is typically used when the device has ATM or Frame Relay interfaces.

It uses more label resources than a per-interface label space.

The path must include at least one hop.

The path may be used for multiple LSPs.

The path may be used multiple times in a single LSP.

The path must define a tunnel destination IP address.

Incoming label

Outgoing label

Incoming interface

Outgoing interface

Link protection tunnels are established if a router is unable to establish node protection tunnels.

Link protection tunnels are only requested for a primary LSP path.

Link protection tunnels can be created for both one-to-one or facility Fast Reroute.

Link protection tunnels detour around a failed next downstream router.

The inner label is the IPv4 Explicit Null. The outer label is the MPLS transport label,

The inner label is an MPLS transport label. The outer label is the IPv4 Explicit Null.

The inner label is the IPv6 Explicit Null. The outer label is an MPLS transport label.

The inner label is an MPLS transport label. The outer label is the IPv6 Explicit Null.

A router will never receive a packet containing this label value.

Request a new label from the peer that provided this label.

Pop the label.

PUSH an additional label onto the label stack.

Signal a new label to the peer that sent the packet.

Router address

Traffic engineering metric

Maximum bandwidth

Link

Admin Group