Free Juniper JN0-335 Practice Exam with Questions & Answers

AppQoS is a service that allows you to prioritize and manage the quality of service (QoS) for different types of applications on SRX Series devices. AppQoS uses application signatures to identify and classify the traffic, and then applies QoS policies to assign bandwidth, priority, and scheduling parameters to the traffic. AppQoS can help you optimize the performance of critical applications, such as VoIP, and ensure that they get the required bandwidth and latency in a congested network12. In this scenario, you can use AppQoS to prioritize the VoIP traffic over other traffic and guarantee its QoS on the SRX Series device at the branch office. References:

• Understanding Application Quality of Service
• Configuring Application Quality of Service

• JSA Rules
• Custom Rules
• Creating a Custom Rule
• JSA Rules - TechLibrary

AppFW and APPID are two application security features that can be used to block malicious applications regardless of the port number being used. AppFW provides policy-based enforcement and control on traffic based on application signatures. By using AppFW, you can block any application traffic not sanctioned by the enterprise. APPID identifies applications based on their behavior and characteristics, regardless of port, protocol, or encryption method. By using APPID, you can classify applications and apply appropriate security policies to them123 References:

• AppSecure: Application Visibility and Control Solution Brief
• Application Firewall | Junos OS | Juniper Networks
• Security Policy Applications and Application Sets | Junos OS | Juniper Networks

References: SSL Proxy Overview Configuring Certificate Authority Profiles Configuring a Root CA Certificate

References:

• [Juniper Security, Professional (JNCIP-SEC) Reference Materials] 1
• [Juniper Security, Specialist (JNCIS-SEC) Reference Materials] 2
• [How to configure a custom signature to block specific URLs using application firewall (AppFW)] 3

To manually failover the primary Routing Engine in an SRX Series high availability cluster pair, you need to issue the request chassis cluster failover redundancy-group group-id node node-id command on the primary node, where group-id is the redundancy group number and node-id is the node number of the secondary node. This command initiates a graceful failover of the specified redundancy group to the secondary node, making it the new primary node. The other options are not necessary or correct for this task. Option A would disable the chassis cluster and reboot the primary node, which is not a graceful failover. Option B is not relevant, as the control link recovery solution is used to restore the control link connectivity between the nodes, not to initiate a failover. Option D would not trigger a failover, as the priority of the secondary node would only take effect after a reboot or a control link failure. References:

• Chassis Cluster Redundancy Group Manual Failover
• Initiating a Chassis Cluster Manual Redundancy Group Failover
• SRX Getting Started - Troubleshoot High Availability (HA)

Juniper ATP Cloud is the threat intelligence hub for Juniper customers, identifying indicators of compromise for users and devices across the network. It provides security intelligence feeds, such as command and control (C&C) and infected hosts, that can be used to block or log malicious traffic. When you configure the C&C category with Juniper ATP Cloud, you need to specify the authentication token, the URL, and the update interval for the feeds. After you commit the configuration, the feeds are downloaded automatically from the Juniper ATP Cloud server. This may take a few minutes, depending on the network latency and the size of the feeds. Therefore, no action is required from the user, and the feeds will have non-zero objects once the download is complete. You can verify the status of the feeds by using the show services security intelligence category summary command, as shown in the exhibit. References:

• Introduction to Juniper ATP Cloud
• security-intelligence (services)
• Juniper ATP Cloud CLI Reference Guide

JIMS uses eventlogs on Domain contollers or Exchange Servers to determine logon events. So to decrease the load on a Domain Controller you could use the Exchange Server to read logs.

References:

• Juniper Identity Management Service (JIMS) Documentation
• Juniper Identity Management Service User Guide
• Overview | JIMS | Juniper Networks
• Juniper - ExamsBoost
• Juniper Identity Management Service Overview

• Referring to the exhibit, we can see that the output of the show chassis cluster status command on both nodes shows that they have the same cluster ID, node ID, priority, and status. The status for both nodes is primary, which means that they are both active and ready to process traffic for all redundancy groups1.
• This situation can occur when the control link between the two nodes is down or not configured properly, and the heartbeat messages cannot be exchanged. Without the heartbeat messages, each node assumes that the other node is down and takes over the primary role for all redundancy groups12.
• This is not a desirable state for the cluster, as it can cause traffic disruption, configuration inconsistency, and split-brain scenarios. To resolve this issue, the control link should be checked and fixed, and the cluster should be synchronized12.

References:

• 1: Troubleshooting an SRX Chassis Cluster with One Node in the Primary State and the Other Node in the Disabled State
• 2: SRX Series Chassis Cluster Configuration Overview