Free ISA ISA-IEC-62443 Practice Exam with Questions & Answers | Set: 7

The Chemical Facility Anti-Terrorism Standards (CFATS) are managed and enforced by the U.S. Department of Homeland Security (DHS), specifically through the Cybersecurity and Infrastructure Security Agency (CISA).

“CFATS is a DHS regulatory program focused on security at high-risk chemical facilities to prevent terrorist exploitation of chemicals of interest.”

— Department of Homeland Security, CFATS Program Overview

These standards require facilities to perform vulnerability assessments and implement site security plans, aligning with principles from frameworks like ISA/IEC 62443.

In the NIST Cybersecurity Framework (CSF), “tiers” represent the degree to which an organization’s cybersecurity risk management practices exhibit the characteristics defined in the framework (such as risk awareness, repeatability, and adaptability). Tiers range from Partial (Tier 1) to Adaptive (Tier 4) and describe the organization's overall cybersecurity maturity or profile.

 According to the IEC 62443 standard, a capability security level (SL-C) is defined as “the security level that a component or system is capable of meeting when it is properly configured and protected by an appropriate set of security countermeasures” 1. A component or system can have different SL-Cs for different security requirements, depending on its design and implementation. The SL-C is determined by testing the component or system against a set of security test cases that correspond to the security requirements. The SL-C is not dependent on the actual operational environment or configuration of the component or system, but rather on its inherent capabilities. References:

IEC 62443 - Wikipedia

At layer 4 of the OSI model, also known as the transport layer, the application that will handle a packet inside a host is identified by a TCP/UDP port number. A port number is a 16-bit integer that is assigned to a specific application or service that runs on a host. Port numbers are used to multiplex and demultiplex the data streams that are exchanged between hosts and end systems. Multiplexing is the process of combining multiple data streams into one, while demultiplexing is the process of separating one data stream into multiple ones. Port numbers are part of the header of the transport layer protocol data unit (PDU), which is called a segment for TCP and a datagram for UDP. The header contains the source port number and the destination port number, which indicate the applications that are involved in the communication. For example, if a host sends a packet to another host using the HTTP protocol, which runs on port 80 by default, the source port number would be a random number chosen by the sender, and the destination port number would be 80. The receiver would then use the destination port number to demultiplex the packet and deliver it to the HTTP application.

Port numbers are divided into three ranges: well-known ports (0-1023), registered ports (1024-49151), and dynamic or private ports (49152-65535). Well-known ports are reserved for common and standardized applications and services, such as HTTP (80), FTP (21), and SSH (22). Registered ports are assigned by the Internet Assigned Numbers Authority (IANA) to specific applications and services that request them, such as Skype (49175) and Minecraft (25565). Dynamic or private ports are not assigned by any authority and can be used by any application or service that needs them, such as ephemeral ports that are used for temporary connections.

The other options are not valid identifiers for the application that will handle a packet inside a host at layer 4 of the OSI model. A TCP/UDP application ID is not a term that is used in the OSI model or the TCP/IP model. A TCP/UDP host ID is not a term that is used in the OSI model or the TCP/IP model, and it would be more appropriate for layer 3, which is the network layer, where the host is identified by an IP address. A TCP/UDP registry number is not a term that is used in the OSI model or the TCP/IP model, and it would be more appropriate for layer 5, which is the session layer, where the registry number is used to identify a session between two hosts.

 Access control is the process of granting or denying specific requests to obtain and use information and related information processing services. It is one of the foundational requirements (FRs) of the ISA/IEC 62443 standards for securing industrial automation and control systems (IACSs). According to the ISA/IEC 62443-3-3 standard, access control includes the following system requirements (SRs):

SR 1.1: Identification and authentication control

SR 1.2: Use control

SR 1.3: System integrity

SR 1.4: Data confidentiality

SR 1.5: Restricted data flow

SR 1.6: Timely response to events

SR 1.7: Resource availability

Among these SRs, the ones that are most related to the critical variables of account management and password strength are SR 1.1 and SR 1.2. SR 1.1 requires that the IACS shall provide the capability to uniquely identify and authenticate all users, processes, and devices that attempt to establish a logical connection to the system. This means that the IACS should have a robust account management system that can create, modify, delete, and monitor user accounts and their privileges. It also means that the IACS should enforce strong password policies that can prevent unauthorized access or compromise of user credentials. Password strength refers to the level of difficulty for an attacker to guess or crack a password. It depends on factors such as length, complexity, randomness, and uniqueness of the password.

SR 1.2 requires that the IACS shall provide the capability to enforce the use of logical connections in accordance with the security policy of the organization. This means that the IACS should have a mechanism to control the access rights and permissions of users, processes, and devices based on their roles, responsibilities, and needs. It also means that the IACS should have a mechanism to audit and log the activities and events related to access control, such as successful or failed login attempts, password changes, privilege escalations, or unauthorized actions.

Therefore, account management and password strength are the critical variables related to access control, as they directly affect the identification, authentication, and authorization of users, processes, and devices in the IACS.

A significant challenge with firewalls in industrial environments is deciding how they should be configured. The complexity arises from needing to balance operational requirements (such as process data flow) with security needs (such as blocking unauthorized access). Misconfiguration can lead either to security gaps or to unnecessary operational disruptions. Firewalls can filter many types of traffic (not just HTTP) and while updates are important, configuration is the biggest ongoing challenge.

Asymmetric (public) key algorithms are a type of cryptographic algorithms that require more than one key. Asymmetric key algorithms use a pair of keys, one for encryption and one for decryption, that are mathematically related but not identical1. The encryption key is usually made public, while the decryption key is kept private. This allows anyone to encrypt a message using the public key, but only the intended recipient can decrypt it using the private key1. Asymmetric key algorithms are also known as public key algorithms or public key cryptography1. Asymmetric key algorithms are used for various purposes, such as digital signatures, key exchange, and encryption2. Some examples of asymmetric key algorithms are RSA, Diffie-Hellman, ElGamal, and Elliptic Curve Cryptography2.

Multiuser accounts and shared passwords are accounts and passwords that are used by more than one person to access a system or a resource. They inherently carry the risk of unauthorized access, which means that someone who is not authorized or intended to use the account or password can gain access to the system or resource, and potentially compromise its confidentiality, integrity, or availability. For example, if a multiuser account and password are shared among several operators of an industrial automation and control system (IACS), an attacker who obtains the password can use the account to access the IACS and perform malicious actions, such as changing the system settings, deleting data, or disrupting the process. Multiuser accounts and shared passwords also make it difficult to track and audit the activities of individual users, and to enforce the principle of least privilege, which states that users should only have the minimum level of access required to perform their tasks. Therefore, the ISA/IEC 62443 standards recommend avoiding the use of multiuser accounts and shared passwords, and instead using individual accounts and strong passwords for each user, and implementing authentication and authorization mechanisms to control the access to the IACS. References:

ISA/IEC 62443-3-3:2013 - Security for industrial automation and control systems - Part 3-3: System security requirements and security levels1

ISA/IEC 62443-2-1:2009 - Security for industrial automation and control systems - Part 2-1: Establishing an industrial automation and control systems security program2

ISA/IEC 62443 Cybersecurity Fundamentals Specialist Training Course3

Shared passwords and multiuser accounts pose specific risks, notably unauthorized access and privilege escalation. In ISA/IEC 62443's framework, these practices are discouraged because they complicate the attribution of actions to individual users and increase the likelihood that accounts can be used beyond their intended scope. Unauthorized access occurs when individuals exploit the shared nature of an account to gain entry to systems or data that they should not access. Privilege escalation can happen when users leverage shared accounts to perform actions at higher permission levels than those assigned to their personal accounts. Conversely, buffer overflows and race conditions are types of vulnerabilities or programming errors, not directly associated with the risks of multiuser accounts or shared passwords.