Free Huawei H19-338 Practice Exam with Questions & Answers | Set: 2

Huawei partners should establish a cyber security assurance system to ensure the cyber security of customers. According to the Huawei Cyber Security Assurance System White Paper, Huawei partners are required to comply with Huawei’s cyber security requirements and standards, implement cyber security management processes and controls, conduct cyber security audits and assessments, and report cyber security incidents.

NE8000 M14 cannot be deployed in a 300 mm-deep cabinet. According to the Huawei NetEngine 8000 M14 Routers Support Guide1, the NE8000 M14 requires a cabinet with a depth of at least 800 mm.

BGP EVPN is a control plane protocol that can be used for VXLAN networks . VXLAN is a technology that creates overlay networks to extend Layer 2 connectivity across Layer 3 networks . BGP EVPN has the following functions as a VXLAN control plane protocol:

It automatically establishes the VXLAN tunnel between VTEPs (VXLAN Tunnel Endpoints), which are devices that encapsulate and decapsulate VXLAN packets . You do not need to manually configure a full-mesh tunnel between all VTEPs, which reduces the configuration complexity and improves the scalability .

It advertises host routes and MAC address entries on the control plane, which are used to learn the location of hosts and their corresponding VTEPs . This reduces the unknown traffic flooding that occurs when the destination MAC address is unknown, and optimizes the packet forwarding by using optimal paths .

It implements Layer 2 interconnection between data centers in different networking modes, such as bridging, routing, or integrated routing and bridging (IRB) . This enables seamless communication between hosts in different subnets or VLANs across data centers .

It advertises subnet routes to implement Layer 3 interconnection of data centers through VXLAN tunnels . This enables routing between different subnets or VLANs across data centers without requiring an external gateway device .

The WAN-side controller can manage only WAN services, not LAN services. The LAN-side controller can manage both LAN and WAN services. This is because the LAN-side controller supports both SD-WAN and SD-Campus functions, while the WAN-side controller only supports SD-WAN functions.

The switch that does not support iStack is S1730S-H. This is because the S1730S-H does not have any stack ports or support stack cards. The iStack technology allows multiple switches to be connected and managed as a single logical device, which improves network scalability and reliability.

The model that is not included in the CloudEngine S7700 family is S7709. The CloudEngine S7700 family consists of three models: S7703, S7706, and S7712. These are smart routing switches designed for next-generation enterprise networks, with features such as wired and wireless convergence, unified user management, quality awareness, and SVF 2.04

The built-in LAN ports on all Huawei NetEngine AR6000/600 series routers can be used as WAN ports. According to the NetEngine AR6000 Series Enterprise Routers Product Overview, NetEngine AR6000/600 series routers support flexible WAN/LAN port configuration, which allows users to use any built-in LAN port as a WAN port.

M-LAG (Multi-Chassis Link Aggregation Group) is the recommended networking mode for leaf switches. According to the Huawei CloudFabric Data Center Network Solution White Paper, M-LAG enables multiple leaf switches to form a logical device that provides high availability, load balancing, and simplified management.