Free Huawei H12-311_V3.0 Practice Exam with Questions & Answers | Set: 9

True

False

Flood Attack detection

Weak IV Attack detection

Spoof Attack detection

Microwave interference detection

IEEE 802.11c

IEEE 802.11h

IEEE 802.11j

IEEE 802.11r

DHCP Incorrect address pool configuration AP Unable to get address

AP Use static discovery, but AC of IP Configuration error

AP Version with AC Inconsistent versions

The controller uses no-auth Authentication mode

5G Priority characteristics refer to 5G Client sends data first

5G After the priority is turned on, only support 2.4G The network transmission speed of the client will be slower

5G Priority request AP Is dual frequency AP Can work normally

5G Priority requires all clients to support at the same time

AP right AC Automatic discovery and AP&AC State machine operation and maintenance

AC right AP Perform management and business configuration delivery

STA Data encapsulation CAPWAP Tunnel forwarding

Defined Mac Layer and physical layer transmission rate

Wi-Fi standard

MIMO

Antenna

Antenna gain

Maximum transmit power (combined power)

It is recommended that a 5.8 GHz AP be deployed for through-wall signal coverage.

In the same scenario, the coverage distance of a 2.4 GHz AP is smaller than that of a 5.8 GHz AP.

Inter-floor coverage is supported.

In an open area, the coverage distance is designed based on the AP's coverage capability.

Add AP offline

Automatically discover the AP and go online normally

Automatically discover AP and confirm to go online

Find APs through multicast and go online automatically