Master the Palo Alto Networks Certified Security Engineer (PCNSE) PAN-OS 11.0 PCNSE Exam with Confidence!

Palo Alto Networks recommends following a specific upgrade path when upgrading PAN-OS to ensure compatibility and minimize the risk of issues. The recommended path involves sequential upgrades through major releases.

B. The detailed upgrade path from PAN-OS 10.1 to 11.0.x involves:

• First, upgrading to the latest preferred maintenance release of the current PAN-OS version (10.1) to ensure that all the latest fixes and improvements are applied.
• Next, upgrading to the base version of the next major release (PAN-OS 10.2.0), followed by upgrading to the latest preferred maintenance release of PAN-OS 10.2. This step ensures that the firewall is on a stable and supported version before proceeding to the next major release.
• Finally, upgrading to the base version of PAN-OS 11.0 (11.0.0), followed by the desired PAN-OS 11.0.x version. This step completes the upgrade to the new major version, providing access to new features and improvements, such as TLSv1.3 support for management access.

This sequential upgrade path is designed to ensure a smooth transition between major versions, maintaining system stability and security.

The template stack should consist of four templates arranged according to the diagram. The template values that will be configured on the firewall if each template has an SSL/TLS Service profile configured named Management will be the values in Chicago. This is because the SSL/TLS Service profile is configured in the Chicago template, which is the highest priority template in the stack. The firewall will inherit the settings from the highest priority template that has the setting configured, and ignore the settings from the lower priority templates that have the same setting configured. Therefore, the values in Datacenter, efwOlab.chi, and Global Settings will not be applied to the firewall. References:

• [Manage Templates and Template Stacks]
• [Template Stack Configuration]
• [Template Stack Priority]

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000oNlUCAU &lang=en_US

https://docs.paloaltonetworks.com/panorama/11-0/panorama-admin/manage-firewalls/transition-a-firewall-to-panorama-management/migrate-a-firewall-to-panorama-management Push the configuration bundle from Panorama to the newly added firewall to remove all policy rules and objects from its local configuration. This step is necessary to prevent duplicate rule or object names, which would cause commit errors when you push the device group configuration from Panorama to the firewall in the next step.

https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-web-interface-help/policies/policies-application-override

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PPDrCAO

In order to see what is in a template, the device-group needs the template referenced. Even if you add the firewall to both the template and device-group, the device-group will not see what is in the template. The following link has a video that demonstrates that B is the correct answer. https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PNfeCAG

>Threat logs, create a log forwarding profile to define how you want the firewall or Panorama to handle logs. >Configure an HTTP server profile to forward logs to a remote User-ID agent. > Select the log forwarding profile you created then select this server profile as the HTTP server profile https://docs.paloaltonetworks.com/pan-os/11-0/pan-os-admin/policy/use-auto-tagging-to-automate-security-actions

To address the issue of application performance degradation due to excessive VoIP traffic, the administrator should configure QoS on the egress interface for the traffic flows and a QoS profile defining traffic classes. QoS stands for Quality of Service, which is a feature that allows the firewall to manage bandwidth usage and prioritize traffic based on various criteria, such as application, user, service, etc. QoS can help improve the performance and quality of latency-sensitive applications, such as VoIP, by guaranteeing them sufficient bandwidth and priority over other traffic1.

To enable QoS on the firewall, the administrator needs to create a QoS profile and a QoS policy. A QoS profile defines the eight classes of service that traffic can receive, including priority, guaranteed bandwidth, maximum bandwidth, and weight. A QoS policy identifies the traffic that matches a specific class of service based on source and destination zones, addresses, users, applications, services, etc2. The administrator can also create a custom QoS profile or use the default one.

The administrator should apply QoS on the egress interface for the traffic flows, which is the interface where the traffic leaves the firewall. This is because QoS can only shape outbound traffic and not inbound traffic. The egress interface can be either internal or external, depending on the direction of the VoIP traffic. For example, if the VoIP traffic is from internal users to external servers, then the egress interface is the untrust interface facing the ISP. If the VoIP traffic is from external users to internal servers, then the egress interface is the trust interface facing the LAN3.

The administrator should assign a high priority and a sufficient guaranteed bandwidth to the VoIP traffic in the QoS profile. This will ensure that the VoIP packets are processed first by the firewall and are not dropped or delayed due to congestion. The administrator can also limit or block other applications that consume too much bandwidth or pose security risks in the same or different QoS classes4.

An Application Override policy for SIP traffic is not necessary to address this issue. An Application Override policy is used to change or customize the App-ID of certain traffic based on port and protocol criteria. This can be useful for optimizing performance or security for some applications that are difficult to identify or have non-standard behaviors. However, SIP is a predefined App-ID that identifies Session Initiation Protocol (SIP) traffic, which is commonly used for VoIP signaling. The firewall can recognize SIP traffic without an Application Override policy5.

QoS on the ingress interface for the traffic flows is not effective to address this issue. As mentioned earlier, QoS can only shape outbound traffic and not inbound traffic. Applying QoS on the ingress interface will not have any impact on how the firewall handles or prioritizes the incoming packets6.

A QoS policy for each application is not required to address this issue. A QoS policy can match multiple applications in a single rule by using application filters or application groups. This can simplify and consolidate the QoS policy configuration and management. The administrator does not need to create a separate QoS policy for each application unless there is a specific need to assign different classes of service or parameters to each application7.

References: QoS Overview, Configure QoS, QoS Use Cases, QoS Best Practices, Application Override, QoS FAQ, Create a QoS Policy Rule

The image shows an IKE Gateway configuration where Site B is set to IKEv1 only mode, and passive mode is not enabled. For dynamic peering to work when Site A is using a DHCP assigned address:

• Passive mode on Site A needs to be disabled. In passive mode, the firewall will not initiate the IKE negotiation and will only respond to negotiation requests from the peer. Since Site A has a dynamic IP, it must be able to initiate the connection to Site B, which has a static IP.
• Matching the IKE version between Site A and Site B is also necessary for successful IPSec tunnel establishment. Since Site B is set to IKEv1 only mode, Site A also needs to be configured to use IKEv1 to ensure that both sites are using the same version for the IKE negotiation process.

NAT Traversal is used when there are NAT devices between the two endpoints, but there's no indication that this is the case here. Additionally, local identification on Site A is not necessarily related to the issue with dynamic peering not working.

https://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/manage-firewalls/manage-device-groups/manage-the-rule-hierarchy#idfb9e2593-a7f1-4e0d-aab5-a2903d654c99 https://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/panorama-overview/centralized-firewall-configuration-and-update-management/device-groups/device-group-policies#id671977ca-1041-4605-8a80-fbc10f3f5d7b