Master the Check Point Certified Security Expert R81.20 156-315.81 Exam with Confidence!

The file that gives you a list of all security servers in use, including port number, is $FWDIR/conf/fwauthd.conf. Security servers are processes that handle application-level protocols such as HTTP, FTP, SMTP, etc., and perform security checks on them. Fwauthd.conf is a configuration file that defines which security servers are enabled, which ports they listen on, and which inspection points they are attached to. 

A star community is a VPN topology where one or more satellites connect to a center gateway. The center gateway can be a Security Gateway or a Security Management Server. The VPN routing option determines how the traffic is routed between the satellites and the center, and between the satellites themselves. There are three VPN routing options available in a star community12:

• To center only: The satellites can only communicate with the center gateway, and not with each other or with any other VPN targets. This option is useful for remote access clients that only need to access resources on the center gateway.
• To center, or through the center to other satellites, to Internet and other VPN targets: The satellites can communicate with the center gateway, and also with other satellites, Internet hosts, and other VPN targets through the center gateway. This option is useful for branch offices that need to access resources on the center gateway, as well as on other branch offices, Internet hosts, and other VPN targets.
• To center and to other satellites through center: The satellites can communicate with the center gateway, and also with other satellites through the center gateway. However, they cannot communicate with Internet hosts or other VPN targets. This option is useful for branch offices that need to access resources on the center gateway and on other branch offices, but not on Internet hosts or other VPN targets.

Therefore, the options A (To satellites through center only) and D (To center only) are not valid VPN routing options in a star community.

References: 1: Remote Access VPN R81.20 Administration Guide - Check Point Software, page 13 2: Gaia R81.20 Administration Guide - Check Point Software, page 1030

 The Logs and Monitor tab is used to monitor network and security performance in SmartConsole. The Logs and Monitor tab lets you view and analyze logs, events, reports, and alerts from various sources, such as Security Gateways, Security Management Servers, Endpoint Security Servers, and SmartEvent Servers. You can also use the Logs and Monitor tab to create custom views, filters, queries, and charts to display the data that is relevant to your needs12.

References: 1: Check Point R81 Security Administration Guide - Check Point Software, page 23 2: Check Point R81 SmartConsole User Guide - Check Point Software, page 9

 According to the Check Point R81 Mobile Access Administration Guide, the recommended number of physical network interfaces in a Mobile Access cluster deployment is three. One interface should be connected to the organization network, one interface should be connected to the Internet, and one interface should be used for synchronization between cluster members. This configuration provides optimal performance and security for Mobile Access traffic. 

 According to the Check Point R81 training course, the medium path is available only when CoreXL is enabled. CoreXL is a performance-enhancing technology that allows multiple CPU cores to process traffic simultaneously. The medium path handles packets that require deeper inspection or content awareness, such as IPS, Anti-Virus, or URL Filtering. The other paths are either available regardless of CoreXL or not valid terms. References: Certified Security Expert (CCSE) R81.20 Course Overview

The command to show SecureXL status is fwaccel stat. This command displays information about SecureXL acceleration, such as the number of accelerated and non-accelerated connections, the reason for non-acceleration, and the SecureXL device name and mode. The other commands are either invalid or show different statistics.

 UserCheck is a communication tool used to inform a user about a website or application they are trying to access. UserCheck allows administrators to interact with users in real time, informing them of the security policy and the actions they need to take. UserCheck can also enable users to self-remediate incidents or request exceptions from the administrator. References: Training & Certification | Check Point Software, Check Point Resource Library

High alert is not an alert option in Check Point. Alert options are ways to notify the administrator or other parties when a security event occurs. The available alert options are SNMP, Mail, User defined alert, Log, Popup alert, and User alert. References: Training & Certification | Check Point Software, Check Point Resource Library

The responsibility of SOLR process on R81.20 management server is to generate indexes of data written to the database. SOLR is an open source search platform that provides fast and scalable indexing and querying capabilities. SOLR is used by the R81.20 management server to index data such as logs, objects, policies, tasks, and events, and to enable quick and efficient searches on this data by SmartConsole and SmartView applications. 

 The TCP/IP model is a four-layer model that describes how data is transmitted over a network. The four layers are: Application, Transport, Internet, and Network Access. The Application layer provides services and protocols for applications to communicate with each other. The Transport layer provides reliable or unreliable data delivery between hosts. The Internet layer provides routing and addressing of packets across networks. The Network Access layer provides physical and logical access to the network media. References: Training & Certification | Check Point Software, Check Point Resource Library

 To ensure that VMAC mode is enabled, the CLI command that should be run on all cluster members is fw ctl get int fwha_vmac_global_param_enabled; result of command should return value 1. VMAC mode is a feature that allows ClusterXL to use virtual MAC addresses for cluster interfaces, instead of physical MAC addresses. This improves the failover performance and compatibility of ClusterXL with switches and routers. To check if VMAC mode is enabled, the command fw ctl get int fwha_vmac_global_param_enabled can be used, which returns 1 if VMAC mode is enabled, and 0 if VMAC mode is disabled. 

 For Stateful Mode configuration, chain modules marked with 2 will not apply. Stateful Mode configuration is a feature that allows administrators to define how packets are processed by different firewall kernel modules in inbound and outbound directions. Chain modules are firewall kernel modules that perform various security functions, such as VPN, IPS, QoS, etc. Each chain module is associated with a key, which specifies the type of traffic applicable to the chain module. The key can be one of the following values: 0 for all packets, 1 for stateful packets, 2 for stateless packets, and 3 for no match packets. For Stateful Mode configuration, only chain modules with key 0 or 1 will apply, as they handle all packets or stateful packets. Chain modules with key 2 will not apply, as they handle stateless packets, which are not relevant for Stateful Mode configuration.

The command that shows the status of processes is cpwd_admin list. Cpwd_admin is a command that allows administrators to manage processes that are registered with the Check Point WatchDog (CPWD) daemon. CPWD is a daemon that monitors the health of critical processes on the Security Gateway or Management Server, and restarts them if they fail or stop responding. Cpwd_admin list shows the process name, PID, status, start time, monitor status, and number of restarts for each process registered with CPWD. 

The true statement about the API server on R81.20 is: By default, the API server is active on management servers with 4 GB of RAM (or more) and on stand-alone servers with 8GB of RAM (or more). The API server is a web service that allows external applications to interact with the Check Point management server using standard methods such as HTTP(S) requests and JSON objects. The API server is enabled by default on R81.20 management servers that have at least 4 GB of RAM, and on stand-alone servers that have at least 8 GB of RAM. The API server can also be manually enabled or disabled from the WebUI or the CLI. 

The valid range for VRID value in VRRP configuration is 1 - 255. VRID stands for Virtual Router ID, and it is a number that identifies a virtual router in a VRRP cluster. A VRRP cluster consists of one or more routers that share a virtual IP address and provide redundancy and load balancing for network traffic. Each router in the cluster must have a unique VRID value, and the VRID value must match the VRID value configured on the interface that connects to the VRRP cluster. The VRID value can be any number from 1 to 255, inclusive.