Free GAQM CDCS-001 Practice Exam with Questions & Answers

Air cooled self-contained systems are highly efficient and do not require ductwork and/or dropped ceiling for installation. This makes them a great choice for locations where installation costs are a major factor, such as in residential applications, or in places with limited space. Additionally, air cooled self-contained systems have more heat removal capacity per unit compared to water cooled systems, making them more cost-effective in the long run.

The best option for enclosing many electrical devices in proximity, especially with audio, video and computers, is Power Distribution Units (PDUs). PDUs are designed to provide power to multiple devices using a single power source, such as a wall outlet or a generator, while providing protection against power surges. PDUs are generally equipped with multiple outlets to allow for a variety of electrical devices to be connected and powered simultaneously.

A circuit breaker is a device designed to protect electrical equipment from damage caused by overload or short circuit. Circuit breakers are designed to detect when too much current is flowing through a circuit and to shut the circuit off when that happens. This protects the equipment from damage due to overloading or short circuiting, and it also helps prevent fires and other accidents.

Frequency is the inverse of period, so to calculate the frequency of a signal with a period of 10 microseconds, you would divide 1 by the period, which is equal to 100 kHz. 

A contactless smart card is a physical security device that uses radio frequency identification (RFID) technology to identify and authenticate an individual. This type of card is used in a variety of applications, such as access control systems and digital payment systems. It is also used in physical access control systems, where the card is used to unlock doors or grant access to restricted areas. Contactless smart cards are also used in building access systems, where the card is used to grant access to certain areas of the building.

Human error is a major cause of data center downtime. Human mistakes are one of the top causes of data center outages, accounting for around one-third of all downtime incidents. Common causes of human error in data centers include misconfiguration, inadequate maintenance, and improper security practices. To reduce the risk of human error, it is important to ensure that data center staff receive proper training, have adequate access control measures in place, and are familiar with best practices for data center operations.

Convenience outlets, also known as duplex receptacles or wall outlets, are used to provide power to non-computing devices, such as lamps, televisions, and other household appliances. They are typically found in residential and commercial buildings and are connected to a circuit breaker or fuse for protection against overloading and electrical fires

An air mounted system is often used to cool small IT environments. This type of cooling system is typically mounted on the wall or ceiling and works by blowing cool air into the room to lower the temperature. Air mounted systems are compact, easy to install and maintain, and can be a cost-effective solution for small spaces.

An ampere (A) is the unit of measurement for electric current. It measures the amount of electrical current flowing through a circuit during a specific time interval. The ampere is named after André-Marie Ampère, a French mathematician and physicist who was one of the main discoverers of electromagnetism.

Ohm (Ω) is the unit of measurement for electric resistance, which is the opposition to the flow of an electric current through a circuit.

Volt (V) is the unit of measurement for electric potential difference, which is the energy required per unit charge to move a test charge between two places in a static electric field.

Watt (W) is the unit of measurement for power, which is the rate at which energy is used or generated in an electrical circuit.

References:

• "Current" (https://www.britannica.com/topic/current-electricity)
• "Electric current" (https://www.sciencedirect.com/topics/engineering/electric-current)
• "Units of Measurement" (https://www.allaboutcircuits.com/textbook/direct-current/chpt-1/units-of-measurement/)

Watts measures the real power drawn by the load equipment and is determined by multiplying the volts and amps of the load