Free Fortinet EMEA-Advanced-Support Practice Exam with Questions & Answers

The ‘set nat enable’ command in a FortiGate firewall policy enables Source NAT (SNAT) for outgoing traffic, typically rewriting the source IP to the FortiGate’s interface IP or an IP pool. It does not disable NAT (B), force a specific pool (C), or limit to incoming traffic (D). Exact extract: "The ‘set nat enable’ command in a firewall policy enables Source NAT, rewriting the source IP address of outgoing traffic to the egress interface IP or a configured NAT pool."

When FortiGate detects a SYN flood attack, it applies rate limiting to SYN packets via a DoS policy, dropping excessive packets to mitigate the attack. It does not drop all packets (A), enable proxy inspection (B), or redirect traffic (D). Exact extract: "FortiGate mitigates SYN flood attacks using DoS policies, which apply rate limiting to SYN packets to prevent overwhelming the system."

When a FortiGate’s CPU enters conserve mode due to high load, proxy-based inspection (e.g., web filtering, DLP) is disabled to reduce resource usage, while flow-based inspection continues. Traffic isn’t fully blocked (A), new sessions may still be processed (C), and routing protocols (D) are unaffected. Exact extract: "In conserve mode, FortiGate disables proxy-based inspection to reduce CPU and memory load, switching to flow-based inspection to maintain performance."

An ARP (Address Resolution Protocol) request is broadcast to resolve an IP address to a MAC address. The source MAC is the sender’s MAC address, and the destination MAC is the broadcast address (FF:FF:FF:FF:FF:FF) to reach all devices on the local network. Fortinet devices handle ARP for Layer 2 communication. Options B, C, and D are incorrect as switches don’t originate ARP requests, the target’s MAC is unknown, and ARP uses broadcast, not multicast. Exact extract: "In an ARP request, the source MAC address is that of the sending device, and the destination MAC address is the broadcast address (FF:FF:FF:FF:FF:FF), sent to all devices in the local network segment."

FortiGate operates on a default-deny principle; if a packet does not match any firewall policy, it is dropped to ensure security. No forwarding (A), IPS processing (C), or automatic allowing (D) occurs without a matching policy. Exact extract: "FortiGate uses a default-deny approach; packets that do not match any configured firewall policy are dropped to prevent unauthorized traffic."

The standard term in OSPF for a router connecting the backbone area (Area 0) to a non-backbone area is "area border router" (ABR). It maintains separate LSDBs for each area and performs summarization. "Area boundary router" is similar but not the standard term; ASBR connects to external AS; backbone router is in Area 0. Exact extract: Go to Network > OSPF. · Set Router ID to 10.11.101.1. · In the Areas table, click Create New and set the following: Area ID. 0.0. · Click OK. · In the Networks ... A router connected to more than one area is an area border router (ABR). An autonomous system boundary router (ASBR) is located between an OSPF autonomous ... This article describes the basic steps to configure FortiGates in an OSPF scenario where the FortiGates will be ABR and ASBR OSPF routers across 3 areas. OSPF areas are groupings of OSPF routers or logical parts of a network. An area's routing information can be sent as a summary to other areas. This article describes that routes learned from the other OSPF areas will be removed on the ABR router when it has multiple areas and has no backbone ...

VMotion in VMware vSphere enables live migration of running virtual machines from one physical server to another with zero downtime, ensuring continuous operation. Fortinet’s FortiGate-VM supports such environments. Options A, C, and D are incorrect as they do not describe VMotion; C refers to a different migration scenario, and D is unrelated to virtualization. Exact extract: "VMotion allows the live migration of a running virtual machine from one physical server to another with no downtime... This ensures workloads continue running during server maintenance or load balancing."

In OSPF, the Area Border Router (ABR) generates Type-4 Summary LSAs to advertise the location of an Autonomous System Boundary Router (ASBR) to other areas. This LSA informs routers in different areas how to reach the ASBR for external routes. ASBR generates Type-5 LSAs for external routes, but ABR summarizes them with Type-4. Not all routers or stub routers do this. Exact extract: This article describes the basic steps to configure FortiGates in an OSPF scenario where the FortiGates will be ABR and ASBR OSPF routers across 3 areas. Router3 is the Autonomous System Border Router (ASBR). It routes all traffic to the ISP BGP router for internet access. It redistributes routes from BGP and ... Type 4 LSAs exist to let the area know the router-id of the ASBR, so the routers can look at the type 5 route, find advertising-router, and map ... An ASBR summary LSA is generated by an ABR and describes the location of an ASBR (Autonomous System Boundary Router) that connects to an external network. The FortiGate in the middle shall be a ABR between the two areas. But I don't want R2 in area 0.0.0.0 to have every /32 route for every VPN client. So I tried ...

FortiGate’s SSL Inspection feature decrypts and inspects SSL/TLS traffic to detect threats or enforce policies, using techniques like full SSL inspection or certificate inspection. Deep Packet Inspection (A) is a broader term, Application Control (C) identifies apps, and Web Filtering (D) blocks URLs, not specific to SSL. Exact extract: "SSL Inspection allows FortiGate to decrypt and inspect SSL/TLS traffic to detect hidden threats or enforce security policies, supporting full or certificate-based inspection."

In a FortiGate HA cluster (active-active or active-passive), if the primary unit fails, a secondary unit automatically takes over as the primary, ensuring continuity of traffic with minimal disruption. Option A is incorrect as traffic continues, C is incorrect as the mode doesn’t change post-failure, and D is unrelated. Exact extract: "In a FortiGate HA cluster, if the primary unit fails, a secondary unit is elected as the new primary, taking over all roles to maintain traffic flow and session continuity."