Free Ericsson ECP-206 Practice Exam with Questions & Answers | Set: 2

The maximum number of unique VLAN IDs available is 4096. A VLAN ID is a 12-bit identifier that can range from 0 to 4095. However, VLAN ID 0 is reserved for tagging the priority of frames and VLAN ID 4095 is reserved for implementation use, so only VLAN IDs from 1 to 4094 are available for user configuration78. VLAN IDs are used to identify different broadcast domains or subnets on a Layer 2 network. VLAN IDs are carried in the IEEE 802.1Q tag in the Ethernet frame header.

References: What is a virtual LAN (VLAN) and how does it work with my managed switch? - NETGEAR Support, Virtual LANs (VLANs) - Cisco

Referring to the exhibit, the correct statement is that the service provider’s P routers are not aware of the customers’ routes. This is because P routers only need to forward MPLS packets based on their labels, without looking into their IP headers or VPN information. The P routers do not have any VRFs configured for the customers, nor do they participate in MP-BGP sessions with other PE routers. The PE routers are responsible for maintaining VRFs for each customer and for exchanging VPN routes with other PE routers using MP-BGP910.

References: Layer 3 VPNs (L3VPN) - Cisco, MPLS VPN - Wikipedia

Penultimate hop popping (PHP) is a function performed by certain routers in an MPLS enabled network. It refers to the process whereby the outermost label of an MPLS tagged packet is removed by a label switch router (LSR) before the packet is passed to an adjacent label edge router (LER). The purpose of PHP is to reduce the load on the LER, as it saves one cycle of label lookup. The LER can forward the packet based on its IP header or another label in the stack, without having to process the outer label. PHPfunctionality is achieved by the LER advertising a label with a value of 3 to its neighbors. This label is defined as "implicit-null" and informs the neighboring LSRs to perform PHP12.

References: Penultimate hop popping - Wikipedia, MPLS Penultimate hop popping - NetworkLessons.com

For IP destinations not found in the IS-IS Level 1 database, the Level 1 router must forward packets to the nearest Level 1-Level 2 router with the attach bit set. The attach bit is a flag in the IS-IS Level 1 LSP that indicates that the router is also a Level 2 router and can reach destinations outside the Level 1 area. The Level 1 router will install a default route pointing to the nearest Level 1-Level 2 router with the attach bit set. This way, the Level 1 router can forward packets to other areas without having to maintain a full Level 2 database. References: Ericsson IP Networking - Routing Protocols, Configure Attach Bit Set - Cisco

Priority queuing (PQ) is a queuing method that establishes four interface output queues that serve different priority levels: high, medium, normal, and low. Traffic in the highest priority queue will experience the least amount of jitter and delay compared to traffic in the other queues, because PQ always services the higher-priority queues first. However, this can also cause traffic in lower priority queues to be starved of bandwidth, especially if the highest priority queue is oversubscribed. Traffic in the highest priority queue is not only reserved for voice traffic, but can also include network control and routing traffic. Traffic in all queues are not always guaranteed a minimum bandwidth, because PQ does not provide any bandwidth reservation mechanism. References: Quality of Service (QoS) Queues and Queuing Explained, Chapter: Configuring Priority Queueing - Cisco

Referring to the exhibit, the two Ericsson routers that support the 100GE interface are Router 6675 and Router 6672. The 100GE interface is a high-speed Ethernet interface that operates at 100 gigabits per second. The Ericsson Router 6000 series is a family ofrouters that provide IP transport for mobile and fixed networks. The Router 6675 is a 5G combined access and E-RAN switch with 100GE interfaces and 320Gb forwarding capacity. The Router 6672 is a high-capacity metro aggregation router with 100GE interfaces and 1.6Tb forwarding capacity12.

References: Router 6000 Series - Ericsson, New Ericsson Router 6000 series couples radio and IP transport for 5G future - Global Brands Magazine

The correct abbreviation for the IP address BFEA:DACA:0000:0000:9390:0000:0000:D91 is BFEA:DACA::9390:0:D91. IPv6 addresses are represented in hexadecimal notation, with eight 16-bit segments separated by colons. To simplify the address representation, IPv6 supports two types of abbreviations. The first abbreviation allows us to skip leading zeros within a segment, while the second abbreviation allows us to drop one or more consecutive segments that contain only zeros, using a double colon (::) instead. However, the double colon can be used only once in an address, to avoid ambiguity34.

References: IPv6 Address Types, Notation, and Structure Explained, IPv6 address - Wikipedia

The correct order of DiffServ priority (highest to lowest) for the DiffServ classes: Default Forwarding (DF), Network Control (NC), Assured Forwarding (AF), and Expedited Forwarding (EF) is EF, NC, AF, DF. DiffServ is a QoS model that classifies and prioritizes traffic into different service classes based on the DSCP field in the IP header. The DSCP field is a 6-bit field that can encode up to 64 different per-hop behaviors (PHBs). The DiffServ classes are predefined groups of PHBs that have similar characteristics and requirements. The four main DiffServ classes are:

• EF: This class provides the highest priority and lowest delay for real-time applications such as voice and video. The DSCP value for EF is 101110 or 46 in decimal12.
• NC: This class provides the second highest priority and low delay for network control traffic such as routing protocols and network management. The DSCP value for NC is 110000 or 48 in decimal12.
• AF: This class provides four levels of assured forwarding with different drop probabilities for each level. AF is suitable for applications that require guaranteed bandwidth and delivery assurance, such as web browsing and email. The DSCP values for AF range from 001010 to 011110 or 10 to 46 in decimal12.
• DF: This class provides the lowest priority and best-effort service for applications that can tolerate packet loss and delay, such as file transfer and backup. The DSCP value for DF is 000000 or 0 in decimal12.

References: Differentiated Services - Wikipedia, DSCP - Differentiated Services Code Point - Mpirical