Free AVIXA CTS-I Practice Exam with Questions & Answers | Set: 2

Connect directly to the CPU using an XLR connector and the Ping program

Use a USB connection to the CPU and the HyperTerminal program

Use a Serial Digital Interface to locate the IP

Use a DVI-D connector and telnet into the device

It does not provide feedback that commands have been executed.

It requires direct line of sight to the device's control point.

It may be subject to interference from ambient light.

It always requires batteries.

using balanced shielded twisted-pair cable

muting the microphone

distancing the microphone from the loudspeaker

extending the cable run to another room

Multimode uses yellow cable jackets

Multimode cables send the signal quicker than single-mode cables

Multimode disperses the signal into many light paths

Multimode cable does not have limited bandwidth

Filters

Compressors

Expanders

Limiters

At the bottom of the rack

Near the top of the rack

At eye-level

In the very back of the rack

gates

filters

limiters

Absorbers

USB

XLR

RJ-45

TRS

Intermediate Metal Conduit (IMC)

Electrical Metallic Tubing (EMT or thinwall)

Flexible Metal Conduit (Flex)

Rigid Metal Conduit (RMC)

indicate the strength of the material the hardware is made from

calculate the length of the hardware

test the amount of impurities present in the material the hardware is made from

calculate the weight of the material the hardware is made from