Free APICS CPIM-Part-2 Practice Exam with Questions & Answers | Set: 5

An effective process to create meaningful change begins with identifying and discussing a past crisis, a potential crisis, or major opportunities. This step is important because it helps to create a sense of urgency and motivation for the change, as well as to clarify the vision and goals of the change1. A past crisis can be used as a learning opportunity to analyze what went wrong and how to prevent it from happening again. A potential crisis can be used as a warning signal to anticipate and prepare for the possible challenges and risks. A major opportunity can be used as a catalyst to seize the competitive advantage and create value for the organization and its stakeholders2.

The other options are not the best ways to start an effective process to create meaningful change. Reviewing financial outcomes and metrics over the last 4 quarters year-over-year may provide some insights into the performance and profitability of the organization, but it may not reveal the underlying causes or drivers of the change, or the future trends and scenarios that may affect the organization3. Refreshing corporate strategy to align with current marketplace realities for your industry may be a necessary step in the change process, but it may not be sufficient to generate buy-in and commitment from the people who are involved in or affected by the change4. Using consultants to provide in-depth analysis of current management opportunities may be a helpful way to obtain external perspectives and expertise, but it may not ensure that the change is aligned with the organization’s culture, values, and capabilities5.

References : How To Create A Sense Of Urgency For Change; How To Use Crisis As A Catalyst For Change; Why Financial Metrics Alone Won’t Drive Change; How To Align Your Strategy With Your Organization’s Culture; How To Choose The Right Consultant For Your Change Project.

The load on a work center is the total time required to complete all the work orders assigned to that work center. The load can be calculated by multiplying the quantity and the run time of each work order, and then adding them up. The formula is:

Load = (Q1 x R1) + (Q2 x R2) + … + (Qn x Rn)

Where Q is the quantity and R is the run time of each work order.

Using the data from the table, we can plug in the values and get:

Load = (10 x 8) + (15 x 9) + (12 x 7.5) + (20 x 10) + (8 x 6.5) = 80 + 135 + 90 + 200 + 52 = 557

Therefore, the load on this work center is 557 hours.

References: CPIM Exam Content Manual Version 7.0, Domain 6: Plan, Manage, and Execute Detailed Schedules, Section 6.3: Monitor Detailed Schedules, Subsection 6.3.2: Describe how to monitor input/output control (I/O) (page 60).

 Apush system is a production system that operates based on planned or forecasted demand, rather than actual or current demand. In a push system, work orders or tasks are released to the work centers according to a predetermined schedule, regardless of the availability of capacity or resources at the work centers. This means that work centers may receive work even if they are already overloaded or have no idle time, which can result in long lead times, high inventory levels, and poor customer service1.

The other options are more likely to occur when using a pull system, which is a production system that operates based on actual or current demand, rather than planned or forecasted demand. In a pull system, work orders or tasks are released to the work centers only when there is a need or a request from the downstream work centers or customers. This means that work centers are scheduled using finite capacity planning, which is a method of allocating capacity and resources based on the actual availability and constraints of the work centers2. Work centers also operate using decentralized control, which means that each work center has the autonomy and authority to make decisions based on the local conditions and signals from the environment3. Work centers also signal previous work centers when they are ready for more work, which is a way of synchronizing the flow of materials and information along the production process4.

References: Push System vs. Pull System: Adopting A Hybrid Approach To MRP; Push Systems vs. Pull System: Definitions and Differences; JUST-IN-TIME MANUFACTURING | SpringerLink; 9 Just-In-Time and Lean Systems - Seneca College.

The information about the consistent overage in actual run time for one operation should be sent first to the engineering manager to evaluate the run time for the routing. A routing is a document that specifies the sequence of operations and work centers required to produce a product or feature. A run time is the amount of time needed to perform an operation or a task at a work center. An overage in actual run time means that the actual time spent on an operation or a task is more than the planned or standard time. This can result in lower efficiency, productivity, or quality, as well as higher costs, waste, or delays.

The engineering manager is responsible for designing and maintaining the routing and the run time for each operation or task. The engineering manager can evaluate the run time for the routing by comparing the actual and planned times, identifying the causes of the overage, and taking corrective actions. For example, the engineering manager may:

• Review the accuracy and validity of the planned or standard time, and update it if necessary.
• Analyze the performance and capability of the machines, equipment, or labor involved in the operation or task, and improve them if needed.
• Investigate the presence of any errors, defects, rework, or variability in the operation or task, and eliminate them if possible.
• Implement lean production techniques, such as value stream mapping, waste reduction, or continuous improvement, to optimize the operation or task.

The other options are not appropriate for sending the information about the consistent overage in actual run time for one operation first. The product manager is not responsible for designing or maintaining the routing or the run time for each operation or task. The product manager is responsible for managing and marketing the product or feature, such as defining its specifications, features, price, or promotion. Increasing the selling price of the product is not a solution for addressing the overage in actual run time, as it may reduce customer demand or satisfaction, as well as increase competition. The quality manager is not responsible for designing or maintaining the routing or the run time for each operation or task. The quality manager is responsible for ensuring and improving the quality of the product or feature, such as setting quality standards, implementing quality control methods, or conducting quality audits. Adding a new qualitymeasurement to the operation is not a solution for addressing the overage in actual run time, as it may increase complexity or cost without improving efficiency or productivity. The production supervisor is not responsible for designing or maintaining the routing or the run time for each operation or task. The production supervisor is responsible for overseeing and coordinating the production activities at a work center, such as scheduling operations, assigning resources, monitoring performance, or resolving issues. Reviewing and explaining the overage in actual run time is not a solution for addressing it, as it does not identify or eliminate its causes.

References := [Routing - an overview | ScienceDirect Topics], [Run Time - an overview | ScienceDirect Topics], [Engineering Manager Job Description - Betterteam], [Product Manager Job Description - Betterteam], [Quality Manager Job Description - Betterteam], [Production Supervisor Job Description - Betterteam]

Third-party logistics (3PL) services are services that involve outsourcing some or all of the logistics functions of a firm, such as transportation, warehousing, distribution, or order fulfillment, to an external provider1. By using 3PL services, a firm can reduce its need to own and operate its own logistics assets, such as trucks, trailers, warehouses, or inventory management systems. These assets are classified as fixed assets on the balance sheet, because they are long-term and tangible assets that are used in the normal course of business2. Therefore, increased use of 3PL services is likely to have the effect of decreasing the fixed assets on a firm’s balance sheet.

The other options are not likely effects of increased use of 3PL services on a firm’s balance sheet. Retained earnings are the accumulated net income of a firm that is not distributed to shareholders as dividends3. Retained earnings are not directly affected by the use of 3PL services, unless the firm’s net income changes as a result of cost savings or revenue growth from outsourcing logistics functions. Accounts receivable are the amounts owed to a firm by its customers for goods or services delivered on credit4. Accounts receivable are not directly affected by the use of 3PL services, unless the firm’s sales volume or credit terms change as a result of improved customer service or delivery performance from outsourcing logistics functions. Intangible assets are non-physical assets that have value based on their intellectual or legal rights, such as patents, trademarks, goodwill, or brand names5. Intangible assets are not directly affected by the use of 3PL services, unless the firm’s reputation or market position changes as a result of enhanced quality or innovation from outsourcing logistics functions. References:

• What Is Third Party Logistics (3PL) ? | Definition, Types, Benefits
• Fixed Asset - Definition & Examples (Assets = Liabilities + Equity)
• Retained Earnings - Definition & Formula
• Accounts Receivable - Overview, Examples & Importance
• Intangible Asset - Definition & Examples