Summer Special 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: bestdeal

Free Oracle 1z0-134 Practice Exam with Questions & Answers

Questions 1

You are managing a WebLogic domain that has the default built-in diagnostic module configured for each server in the domain.

You have the following requirements:

  • You want to capture metrics that are not collected by any of the built-in diagnostic modules.
  • You want to continue capturing the metrics that are already captured by the existing built-in module.
  • You want your configuration to persist after the server is restarted.

What are two approaches you can apply to achieve this result? (Choose two.)

Options:
A.

Clone the built-in module, add now metrics to it, deactivate the existing module, and activate your new module.

B.

Leave the built-in module, create a new module and add metrics to it, and activate your new module alongside the built-in module.

C.

Leave the built-in module, create an external resource descriptor module and add metrics to it, and activate your new module alongside the built-in module.

D.

Remove the built-in module, create an external resource descriptor module and add built-in and new metrics to it, and activate your new module alongside the built-in module.

Oracle 1z0-134 Premium Access
Questions 2

You are troubleshooting an issue with a WLS data source. However, your attempt to execute a manual test on the connection pool fails when you invoke the testPool() method on the corresponding JDBCDataSourceRuntimeMBean.

Which configuration condition would contribute to the failure of executing the test? (Choose the best answer.)

Options:
A.

The TestTableName property is either not set or is set to an invalid SQL statement.

B.

The TestFrequencySeconds property is set to a value greater than 0.

C.

The TestReservedConnections property is enabled.

D.

The ManualTestEnabled property is set to false.

E.

The ConnectionReserveTimeoutSeconds property is set to a value other than -1.

Questions 3

A client application asynchronously receives the message sent to a JMS Queue. The client is going to send a response to the sender.

Which two JMS Header fields from the original message are used to send the response? (Choose two.)

Options:
A.

JMSResponseMode

B.

JMSTimeStamp

C.

JMSDeliveryMode

D.

JMSCorrelationID

E.

JMSReplyTo

Questions 4

Which are three valid actions of the Post Domain Creation process? (Choose three.)

Options:
A.

Import LDAP data from XML files.

B.

Run pack and unpack commands for managed servers on remote machines.

C.

Run any SQL scripts to generate database artifacts.

D.

Use WLST to run the postdomain.py script.

E.

Run the root.sh script.

F.

Assign DNS names to all the hosts.

G.

Run the RCU utility for each hosted application.

Questions 5

What is true about an extension template? (Choose the best answer.)

Options:
A.

can be created from an existing template

B.

can include security realm information

C.

can include Node Manager information

D.

can include administrator username and password

E.

can include administration server information

Questions 6

Examine the illustration:

1z0-134 Question 6

Which best describes the above illustration?

Options:
A.

depicts an Active GridLink Data Source between WebLogic Server and an Oracle Database service that includes two RAC nodes

B.

depicts a FAN-disabled Data Source between WebLogic Server and an Oracle Database service that includes two RAC nodes

C.

depicts a Multi Data Source between WebLogic Server and an Oracle Database service that includes two RAC nodes

D.

depicts a Data Source using SCAN between WebLogic Server and an Oracle Database service that includes two RAC nodes

Questions 7

You are required to configure a Coherence cluster for a WebLogic domain. Review the image below for the architecture of the WebLogic domain.

1z0-134 Question 7

The configuration represents the following:

  • Two WebLogic clusters of n number of servers each
  • One cluster contains an EAR deployment that contains a WAR module and a GAR module
  • One cluster contains a GAR deployment
  • Application data flows into the cluster with the EAR deployment and then to the cluster with the standalone GAR deployment

Based on this configuration, what is the typical configuration of a Coherence cluster for this domain?

Options:
A.

Single Coherence cluster that includes both WebLogic clusters.EAR cluster is storage-disabled.GAR cluster is storage-enabled.

B.

Single Coherence cluster that includes both WebLogic clusters/EAR cluster is storage-enabled.GAR cluster is storage-disabled.

C.

A Coherence cluster for each WebLogic cluster.EAR and GAR clusters use a replicated topology with storage enabled.

D.

Single Coherence cluster that includes both WebLogic clusters.EAR and standalone GAR clusters are both storage-enabled.

Questions 8

Examine the domain diagram:

1z0-134 Question 8

Assume all servers are up and running and you have just started an offline WLST interactive session. Assume further that the username/password “weblogic/Welcome1” maps to a valid administrator.

You type two lines of WLST code:

connect(‘weblogic’,‘Welcome1’,‘host02.acme.com:7101’)

print cmo.getType() + ‘:’ + cmo.getName()

What will be printed? (Choose the best answer.)

Options:
A.

Domain:TestDomain

B.

DomainRuntime:server03

C.

Server:server03

D.

Machine:machine02

E.

Session:weblogic

Questions 9

You have configured automatic service migration for your JTA service within a domain named mydomain. You find that after the automatic migration completes certain scripts execute automatically and there is a failure happening in these scripts.

Where would you look for these scripts for error correction by default? (Choose the best answer.)

Options:
A.

/user_projects/domains/mydomain/bin/service_migration

B.

/user_projects/domains/mydomain/bin/jta-scripts

C.

/user_projects/domains/mydomain/bin/servers/

D.

/user_projects/domains/mydomain/bin/

Questions 10

Your application includes a message driven bean (MDB) that is listening to messages on a JMS Queue. You need to ensure that every message is processed exactly once by the MDB.

Which configuration allows you to achieve this requirement? (Choose the best answer.)

Options:
A.

Add an exception handler for the onMessage method in the MDB.

B.

Set the Redelivery Limit for the Queue to zero.

C.

Use container-managed transactions, so that messages are redelivered if unacknowledged.

D.

Set the MDB instance count to 1 in the deployment descriptor.

Exam Code: 1z0-134
Certification Provider: Oracle
Exam Name: Oracle WebLogic Server 12c: Advanced Administrator II
Last Update: Jul 15, 2025
Questions: 125

Oracle Related Exams

1z0-1087-24 - Oracle Account Reconciliation 2024 Implementation Professional
1z0-1046-24 - Oracle Global Human Resources Cloud 2024 Implementation Professional
1z0-1151-25 - Oracle Cloud Infrastructure 2025 Multicloud Architect Professional
1z0-342 - JD Edwards EnterpriseOne Financial Management 9.2 Implementation Essentials
1z0-184-25 - Oracle Database 23ai AI Professional
1z0-1150-1 - Oracle Guided Learning Administrator Foundations Associate - Rel 1
1z0-829 - Java SE 17 Developer
1z0-1061-24 - Oracle CX Sales 2024 Implementation Professional
1z0-1073-24 - Oracle Inventory Cloud 2024 Implementation Professional
1z0-1121-25 - Oracle Cloud Infrastructure 2025 Networking Professional - Beta
1z0-1115-24 - Oracle Cloud Infrastructure 2024 Multicloud Architect Associate
1z0-1091-25 - Oracle Utilities Meter Solution Cloud Service 2025 Implementation Professional
1z0-771 - Oracle APEX Cloud Developer Professional
1z0-1112-2 - Oracle Procurement Business Process Foundations Associate Rel 2
1z0-1078-25 - Oracle Product Lifecycle Management 2025 Implementation Professional
Oracle Free Access
Get Oracle Full Access

Oracle Free Exams
Oracle Free Exams
Examstrack offers comprehensive free resources and practice tests for Oracle exams.