How to Easily Pass the RedHat RH302 Exam: Expert Advice

Do the following steps as:

1.echo “1” >/proc/sys/net/ipv4/ip_forward

2.vi /etc/sysctl.conf

net.ipv4.ip_forward = 1

If you want to use the Linux System as a Router to make communication between different networks, you need enable the IP forwarding. To enable on running session just set value 1 to /proc/sys/net/ipv4/ip_forward. As well as automatically turn on the IP forwarding features on next boot set on /etc/sysctl.conf file.

Do the following steps as:

1.cat >schedule

*/2 * * * * /bin/echo “Hello World” >/dev/tty8

crontab schedule

Verify using: crontab –l

service crond restart

Cron helps to schedule on recurring events. Pattern of Cron is:

MinuteHourDay of MonthMonthDay of WeekCommands

0-590-231-311-120-7 where 0 and 7 means Sunday.

Note * means every. To execute the command on every two minutes */2.

To add the scheduled file on cron job: crontab filename

To List the Cron Shedule: crontab –l

To Edit the Schedule: crontab –e

To Remove the Schedule: crontab –r

When user creates the file/directory, user owner will be user itself and group owner will be the primary group of the user.

There is one Special Permission SGID bit, when you set the SGID bit on directory,When users creates the file/directory automatically owner group will be same as a parent directory.

chmod g+s /data

Verify using: ls -ld /data

You will get: drwxrws---

Do the following steps as:

1. Insert the CD on CD-ROM and start the system.

2. In Boot: Prompt typelinux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 172.24.254.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10.Create the two RAID partitions having equal size of remaining all free space.

11.Click on RAID button

12.Type mount point /archive

13.Select RAID Level 0

14.Click on ok

15. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

Login as a root user

cat >schedule.txt

30 05 * * * /bin/echo “Hello”

3. crontab –u david schedule.txt

4. service crond restart

The cron system is essentially a smart alarm clock. When the alarm sounds, Linux runs the commands of your choice automatically. You can set the alarm clock to run at all sorts of regular time intervals. Alternatively, the at system allows you to run the command of your choice once, at a specified time in the future.

Red Hat configured the cron daemon, crond. By default, it checks a series of directories for jobs to run, every minute of every hour of every day. The crond checks the /var/spool/cron directory for jobs by user. It also checks for scheduled jobs for the computer under /etc/crontab and in the /etc/cron.d directory.

Here is the format of a line in crontab. Each of these columns is explained in more detail:

#minute, hour, day of month, month, day of week, command

*        *     *             *      *            command

Entries in a crontab Command Line

Field

Value

Minute

0-59

Hour

Based on a 24-hour clock; for example, 23 = 11 p.m.

Day of month

1-31

Month

1-12, or jan, feb, mar, etc.

Day of week

0-7; where 0 and 7 are both Sunday; or sun, mon, tue, etc.

Command

The command you want to run

Do the following steps as:

1.dump -0u –f /tmp/back /dev/hda4

dump is the standard backup utility. According to the questions, fullback should take. –0 means fullback, -u means update the /etc/dumpdates which maintains the backup record and -f means filename. If you are directly taking backup into other device, you can specify the device name.

e dump -0u -f /dev/st0 /dev/hda4. Where hda4 is a separate partition mounted on /home.

Do the following steps as:

1.chmod 770 /data

2.Verify using : ls –ld /data

Preview should be like:

drwxrwx--- 2 root sysadmin 4096 Mar 16 18:08 /data

To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysadmin) can fully access the directory so: chmod 770 /data

Do the following steps as:

1.First check the size of Logical Volume: lvdisplay /dev/vo/myvol

2.Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol

3.Make Available the size on online: ext2online /dev/vo/myvol

4.Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol

5.Verify that the size comes in online or not: df -h

We can extend the size of logical Volume using the lvextend command. As well as to decrease the size of Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical Volume without unmount as well as we can bring the size of Logical Volume on online using ext2online command.

When you Boot the System, it starts on default Runlevel specified in /etc/inittab:

Id:?:initdefault:

When System Successfully boot, it will ask for username and password. But you don’t know the root’s password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.

Restart the System.

You will get the boot loader GRUB screen.

Press a and type 1 or s for single mode

ro root=LABEL=/ rhgb queit s

System will boot on Single User mode.

Use passwd command to change.

Press ctrl+d