Achieve Success in the Huawei H12-322 Exam: A Detailed Huawei Certified ICT Professional - Wireless Local Area Network- Planning and Optimizing Enterprise WLAN Guide

The transmission path of the bridge link is occluded, marking the latitude and longitude of the station.

Observe the AP and antenna installation method for the site.

Every site needs to pay attention to the location of the weak house

Whether to add a relay between the leaf site and the aggregation site

Single-flow single-frequency omnidirectional antenna

Single-current dual-frequency omnidirectional antenna

Dual-current single-frequency directional antenna

Dual-stream dual-frequency directional antenna

Ceiling coverage

Base cover

Ceiling coverage

Wall covering

30Mbps

90Mbps

150Mbps

300Mbps

True

False

Supporting finger operations during the process of drawing obstacles, moving the scaled drawings to find the best position to draw obstacles, does not support increasing obstacle types

The industrial survey tools and planning tools need to be used together. First, get the drawings, first use the planning tools to make a simple plan for the project, and then take the Pad to the present.

Work on the site, then export the project and import it into the planning tool for further planning.

Create a new project, select the floor node, see the corresponding building thumbnail in the preview box on the right, click on the thumbnail to enter the selected floor to supplement the survey information.

Pad's industrial survey tools and planning tools are suitable for pre-sales network regulations, and WLAN test tools are used for post-production verification before delivery.

Understand signal coverage

Understanding signal interference

Understand the shortcomings of the current network environment

Perform network verification

The field strength demand in key areas is that the main online area of ​​the user can be controlled at -40~-80dBm. If the power is too strong, it will easily lead to receiving overload, and the power is too weak.

Will cause the connection rate to drop

The interference field strength requirement is that the same-frequency interference in the same area is not more than -80dBm

The fringe field strength level combined with the receiving sensitivity and edge bandwidth requirements are generally selected above -75dBm

The leakage field strength of the system should not be too large, and the field strength at 10m of the external network of the building cannot be greater than -90dBm.

True

False

Confirm the local available channel with the customer before planning

The same channel is the same as the channel sent by the antenna connected to the AP.

Huawei's room AP6310 supports channel planning for 2.4G and 5G bands simultaneously.

Adjacent edge antennas do not use the same channel