Your Path to Success: How to Pass the iSQI CTFL_Syll2018 ISTQB Certified Tester Foundation Level (Syllabus 2018) Exam

The term ‘Pesticide paradox’ refers to the phenomenon where the effectiveness of test cases that are repeated and focused on the same scenarios decreases over time because they tend to find the same defects or no defects at all. This is because the system under test becomes more resistant or immune to the existing test cases, just like pests become more resistant or immune to pesticides over time. To overcome the pesticide paradox, test cases should be regularly reviewed and updated to cover new or changed requirements, scenarios, risks, or defects. Test cases should also be designed to cover different aspects and perspectives of the system under test, such as functionality, usability, performance, security, etc. You can find more information about the pesticide paradox in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 4, Section 4.11.

Test techniques are methods or procedures that can be used to design, execute, or evaluate test cases. Test techniques can be classified into two categories: specification-based and structure-based. Specification-based test techniques, also known as black-box test techniques, are based on the requirements, specifications, or expectations of the system under test. They do not require any knowledge of the internal structure or implementation of the system. Some examples of specification-based test techniques are use case testing, state transition testing, decision table testing, etc. Structure-based test techniques, also known as white-box test techniques, are based on the code, architecture, or design of the system under test. They require some knowledge of the internal structure or implementation of the system. Some examples of structure-based test techniques are control flow testing, data flow testing, branch testing, statement testing, etc. You can find more information about test techniques in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 41.

Static analysis tools are tools that examine the code or design of a software system without executing it. Static analysis tools can be used to find defects, measure complexity, check compliance, or improve quality. Some examples of defect types that can be found by static analysis tools are:

• Variables that are never used: This defect type occurs when a variable is declared but not referenced or assigned in the code, which indicates a waste of memory or a logic error.
• Coding standard violations: This defect type occurs when the code does not follow the predefined rules or conventions for formatting, naming, commenting, etc., which affects the readability and maintainability of the code.
• Uncalled functions and procedures: This defect type occurs when a function or procedure is defined but not called or invoked in the code, which indicates a waste of resources or a missing functionality.

Memory leaks are defect types that are least likely to be found by static analysis tools because they are related to the dynamic behavior and performance of the software system. Memory leaks occur when a program does not release memory that it has allocated, causing the system to run out of memory and slow down or crash. Memory leaks can only be detected by dynamic analysis tools that monitor the memory usage of the program during execution. You can find more information about static analysis tools in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 6, Section 6.3.

Regression testing is a type of testing that is performed after a software system has been changed or modified to verify that the changes have not introduced any new defects or adversely affected the existing functionality of the system. Regression testing can be performed when the software system undergoes different types of changes, such as:

• Corrective changes: Changes that fix defects or errors in the software system
• Adaptive changes: Changes that adapt the software system to new platforms or environments
• Perfective changes: Changes that improve the performance or usability of the software system
• Preventive changes: Changes that avoid potential problems or issues in the software system

In this case, the software system was re-deployed because the backend database was changed from one vendor to another, which is an example of an adaptive change. Therefore, the test manager decided to perform some functional tests on the re-deployed system to ensure that the change did not affect the functionality of the system. This is an example of regression testing.

The other types of testing mentioned in the question are not relevant for this scenario. For example:

• Non-functional testing: This type of testing verifies the non-functional aspects of the software system, such as reliability, performance, security, usability, etc.
• Structural testing: This type of testing verifies the internal structure or implementation of the software system, such as code, architecture, design, etc.
• Unit testing: This type of testing verifies individual components or units of software in isolation from other components or systems.

You can find more information about regression testing in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 2, Section 2.4.

The fundamental test process activity where the sufficiency of testing and resulting information are assessed is Evaluating exit criteria and reporting. This activity involves checking whether the test objectives have been met and whether there are any unresolved issues or risks that could affect the release or deployment decision. This activity also involves preparing and communicating a test summary report that summarizes the test activities and results and provides recommendations and feedback for improvement. You can find more information about Evaluating exit criteria and reporting in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 3, Section 3.5.

Maintenance testing is a type of testing that is performed after a software product has been delivered and deployed to ensure that it still meets its requirements and functions correctly after changes have been made to it or to its environment. Changes can include corrective changes (fixing defects), adaptive changes (adapting to new platforms or environments), perfective changes (improving performance or usability), or preventive changes (avoiding potential problems). One of the appropriate reasons for maintenance testing is to verify that the software product works as expected after upgrading the operating system, which is an example of an adaptive change. Other reasons for maintenance testing can include verifying that the software product works as expected after fixing defects, adding new features, improving performance, or preventing future issues. You can find more information about maintenance testing in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 12.

Test metrics are quantitative measures that are used to monitor, control, and improve the test process and its outcomes. Test metrics can be collected at different levels of testing (test case, test suite, test project, etc.) and can be used for different purposes (planning, estimation, execution, evaluation, etc.). Some examples of common test metrics are:

• Percentage of work done in test environment creation: This metric indicates how much effort has been spent on setting up and maintaining the test environment, which includes hardware, software, network, data, tools, etc., that are required for conducting the test activities.
• Number of test cases run: This metric indicates how many test cases have been executed during a given period or phase of testing.
• Deviation from test milestone dates: This metric indicates how much delay or ahead of schedule the test activities are compared to the planned dates.
• Defect density: This metric indicates how many defects have been found per unit of size or functionality of the system under test.

Average number of expected defects per requirement is not a common test metric because it is not easy to estimate or measure how many defects are likely to be found for each requirement. Moreover, this metric does not provide useful information for improving the test process or evaluating the test results. You can find more information about test metrics in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 5, Section 5.41.

A configuration management tool is a tool that allows users to manage and control the versions and changes of software artifacts, such as code, documents, test cases, etc. A configuration management tool can help prevent the loss of Sam’s updates by:

• Providing a centralized repository where Sam can store and retrieve his test cases and other artifacts
• Keeping track of the history and status of each artifact and allowing Sam to compare and revert to previous versions if needed
• Supporting collaboration and communication among team members by allowing them to share and access the latest versions of the artifacts

The other tools mentioned in the question are not relevant for this scenario because they do not provide the same functionality or benefits as a configuration management tool. For example:

• A. Incident management tool: This tool type allows users to record, track, manage, and report the defects found during testing. It does not help with managing or controlling the versions or changes of test cases or other artifacts.
• C. Test execution tool: This tool type allows users to execute test cases automatically or semi-automatically and compare the actual results with the expected results. It does not help with managing or controlling the versions or changes of test cases or other artifacts.
• D. Backup tool: This tool type allows users to create copies of data or files and store them in a different location or device for recovery purposes. It does not help with managing or controlling the versions or changes of test cases or other artifacts.

You can find more information about configuration management tools in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 6, Section 6.4.

Test estimation is the process of predicting the effort, time, and resources required for testing a software system. Test estimation depends on several factors that influence the scope, complexity, and quality of testing. Some of these factors are:

• Characteristics of the product: This factor indicates how difficult or challenging it is to test the software system based on its size, functionality, reliability, usability, performance, security, etc.
• Characteristics of the development process: This factor indicates how well or poorly the software system is developed based on the development methodology, standards, tools, techniques, etc.
• Characteristics of the test process: This factor indicates how effective or efficient the testing process is based on the test strategy, plan, design, execution, evaluation, etc.
• Characteristics of the test team: This factor indicates how skilled or experienced the test team is based on their knowledge, competence, motivation, communication, collaboration, etc.

The outcome of testing of previous test cycle is not a factor on which test estimation is dependent upon because it does not affect the effort, time, or resources required for testing the current test cycle. Rather, it is an outcome or consequence of test estimation that can provide feedback and lessons learned for improving future test estimations. You can find more information about test estimation in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 22.

A use case is a description of how a user interacts with a system to achieve a goal or perform a task. A use case typically consists of a sequence of steps or actions that the user and the system perform to complete the goal or task. A use case can be used as a basis for designing test cases that verify the functionality and usability of the system under test. A test sequence that represents a possible use case should follow the logical order and flow of the user-system interaction and cover the main scenario and possible variations or exceptions. For example, based on the test cases given for a Library Management System, we can identify the following use cases:

• UC1: Add a new borrower to the system
• UC2: Update a borrower’s data
• UC3: Remove a borrower from the system
• UC4: Loan a book to a borrower
• UC5: Return a book from a borrower
• UC6: Reserve a book for a borrower
• UC7: Send “reservation ready” message to a borrower

The test sequence that represents a possible use case is D. 1-2-6-7-4-5-3. This test sequence follows the logical order and flow of the user-system interaction and covers the main scenario and possible variations or exceptions. For example:

• TC1: Add a new borrower to the system -> This is the first step of the use case, where the user registers as a new borrower in the system.
• TC2: Update a borrower’s data -> This is a possible variation of the use case, where the user updates their personal or contact information in the system.
• TC6: Reserve a book for a borrower -> This is the second step of the use case, where the user reserves a book that they want to borrow from the library.
• TC7: Send “reservation ready” message to a borrower -> This is the third step of the use case, where the system sends a message to the user informing them that their reserved book is ready for pickup.
• TC4: Loan a book to a borrower -> This is the fourth step of the use case, where the user picks up their reserved book from the library and loans it from the system.
• TC5: Return a book from a borrower -> This is the fifth step of the use case, where the user returns their borrowed book to the library and returns it to the system.
• TC3: Remove a borrower from the system -> This is a possible exception of the use case, where

the user decides to cancel their membership and remove their account from the system.

The other test sequences do not represent possible use cases because they do not follow the logical order and flow of the user-system interaction or they do not cover the main scenario and possible variations or exceptions. For example:

• A. 1-4-2-7-5-6-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC4 (Loan a book to a borrower) before TC6 (Reserve a book for a borrower), which does not make sense because the user cannot loan a book that they have not reserved yet.
• B. 1-6-2-5-7-4-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC5 (Return a book from a borrower) before TC4 (Loan a book to a borrower), which does not make sense because the user cannot return a book that they have not loaned yet.
• C. 1-6-4-7-5-3-2 -> This test sequence does not cover the main scenario and possible variations or exceptions because it omits some steps that are essential for completing or terminating the use case. For example, it omits TC2 (Update a borrower’s data), which is a possible variation of the use case that allows the user to change their personal or contact information in the system.

You can find more information about use cases and test sequences in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.