Nokia 4A0-105 Exam Made Easy: Step-by-Step Preparation Guide

It flushes the local FDB speeding recovery

It discards all packets in the queue and sends icmp-discad messages to the sender. The packets are re-transmitted resulting in no loss of data.

On failure, the PE sends an LDP flush-all-from-me message to all PE devices in the VPLS. This speeds convergence to the new topology.

It is not important to use send-flush-on-failure as Active/Standby signalling automatically converges the FDB in all VPLS instances

5-one for each service.

2-one in each direction.

10-five in each direction.

None of the above.

Option A

Option B

Option C

Option D

Yes

No

The overhead consists of 26 bytes. 14 DLC + 2 Ethertype + 8 for mpls labels + 2 for GRE

The overhead consists of 14 bytes for DLC.

The overhead consists of 18 bytes. 14 DLC +4 for mpls labels

The overhead consists of 22 bytes. 14 DLC + 8 for mpls labels

PE-A must replicate the frame to all devices participating in the VPLS

PE-A must replicate the frame to all PEs within Metro A

PE-A must replicate the frame to all devices in the Metro A

All of the above

The sdp id is different on the far-end.

LDP is disabled on the far-end.

The vc-id is different on the far-end.

The mesh-sdp is missing on the far-end.

The mesh-sdp is administratively shutdown on PEL

There is an MTU mismatch.

Spanning tree must be enabled within the VPLS.

Spanning tree BPDUs must be untagged.

Spanning tree BPDUs must be tagged.

Spanning tree must be disabled within the VPLS.

In a dynamic environment where MAC addresses are changing rapidly, the lower the age-time, the larger the fdb-table-size should be.

In a dynamic environment where MAC addresses are changing rapidly, the higher the age-time, the larger the fdb-table-size should be.

In a dynamic environment where MAC addresses are changing rapidly, the higher the age-time, the smaller the fdb-table-size should be.

There is no relationship between the age-time and the fdb-table-size.

As frames leave the switch, the DA is populated into the FDB.

As frames enter the switch, the DA is populated into the FDB.

As frames leave the switch, the SA is populated into the FDB.

As frames enter the switch, the SA is populated into the FDB.