Achieve Success in the Riverbed 299-01 Exam: A Detailed Riverbed Certified Solutions Professional - Network Performance Management Guide

When the traffic flow matches more than one Application signature. This indicates that the one Application may have been tunneled over the other.

When an Application runs over a non-standard port (such as TELNET traffic on Port 80).

When a "port definition" is non-standard (e.g. when you change tcp/80's definition from http to telnet).

When a Layer-4 Application Mapping is defined.

Steelhead

CE router

PE router

Netflow-enable hosts

1-d; 2-b; 3-c; 4-a; 5-b

1-e; 2-c; 3-d; 4-a; 5-b

1-d; 2-c; 3-e; 4-b; 5-a

1-d; 2-c; 3-e; 4-a; 5-b

1-e; 2-d; 3-c ; 4-b; 5-a

Allows enabling/disabling the detection of dips in the metric.

Allows tuning of the tolerance range of the metric.

Allows setting of a noise floor for the metric.

Allows adjusting the notifications for the metric.

Allows enabling/disabling the detection of spikes in the metric.

At least one NetFlow sources (router, switch, or steelhead).

At least one lookup router and at least one access tier switch.

A Vulnerability Scanner and a Netflow source (router, switch, or steelhead).

A Vulnerability Scanner and an External Link.

Cascade Shark

Router

Layer 3 switch

Steelhead appliance

Cascade Sensor

You have to manually configure the interface speeds on the Devices/Interfaces page.

You have to configure SNMP access to the reporting devices on the Devices/Interfaces page.

One of either A or B above.

None of the above; Cascade will figure this out automatically.

11 for the Cascade Profiler, 3 Cascade Gateways

10 for the Cascade Profiler, 3 Cascade Gateways

11 for the Cascade Profiler, 5 Cascade Gateways

10 for the Cascade Profiler, 5 Cascade Gateways

12 for the Cascade Profiler, 4 Cascade Gateways

IP Addresses, Port Numbers, Protocol, TCP Flags, DSCP Marking, number of bits, number of packets, retransmitted bits

IP Addresses, Port Numbers, Protocol, TCP Flags, DSCP Marking, number of bits, number of packets, inbound/outbound interface ID

IP Addresses, MAC Addresses, Port Numbers, Protocol, DSCP Marking, number of bits, number of packets

IP Addresses, Port Numbers, Protocol, Round Trip Time, DSCP Marking, number of bits, number of packets

IP Addresses, Port Numbers, Protocol, Packet Latency, DSCP Marking, number of bits, number of packets

Ask Riverbed Support to send you the proper View to use.

Open the View folders in Cascade Pilot to look for a View named "Round-trip time".

Use the View search box and enter "round".

Use the Help menu and search for round.