Get Certified: Proven Methods to Pass the Brocade 170-010 Exam

When verifying a new Brocade Vyatta vRouter installation on a hypervisor, which action must be taken with the configuration file?

What is the maximum number of domain names a vRouter can advertise using Dynamic DNS?

Which command will display the revision of software installed?

vyatta@vyatta:~$ show interfaces

Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down

Interface IP Address S/L Description

--------- ---------- --- -----------

eth0 172.24.42.52/24 u/u

eth1 192.168.12.2/24 u/u

eth2 192.168.23.2/24 u/u

eth3 192.168.128.2/24 u/u

lo 127.0.0.1/8 u/u

::1/128

vyatta@vyatta:~$ show dns forwarding nameservers

-----------------------------------------------

Nameservers configured for DNS forwarding

-----------------------------------------------

172.24.42.1 available via 'system'

216.134.160.13 available via 'system'

Based on the output shown, which two statements are true? (Choose two.)

vyatta@vyatta:~$ show dhcp server leases

IP address Hardware Address Lease expiration Pool Client Name

---------- ---------------- ---------------- ---- -----------

10.224.7.40 00:04:f2:02:84:49 2013/06/22 17:46:20 ClientLAN

10.224.7.41 d4:be:d9:1b:ed:9e 2013/06/22 20:27:26 ClientLAN PC-HR-34

vyatta@vyatta:~$ show interfaces

Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down

Interface IP Address S/L Description

--------- ---------- --- -----------

eth0 192.168.200.254/24 u/u

eth1 192.168.100.1/24 u/u

eth2 10.224.7.1/25 u/u

eth3 172.24.42.1/24 u/u

lo 127.0.0.1/8 u/u

::1/128

Based on the output shown, which statement is true?

Which two steps are required to enable logging of firewalled packets? (Choose two.)

If all interfaces are active, which route would be preferred?

VLAN 10 is configured on ethernet 0.

Which command line will display operational statistics for the VLAN?

vyatta@vyatta:~$ show interfaces

Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down

Interface IP Address S/L Description

--------- ---------- --- -----------

eth0 172.24.42.51/24 u/u

eth1 192.168.101.1/24 u/u

eth2 192.168.12.1/24 u/u

eth3 192.168.13.1/24 u/D

lo 127.0.0.1/8

::1/128

vyatta@vyatta:~$

Based on the output, which two could be the problem with eth3? (Choose two.)

Your router has received a packet destined for host 192.168.12.2.

vyatta@vyatta:~$ show ip route

Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,

I - ISIS, B - BGP, > - selected route, * - FIB route

S>* 0.0.0.0/0 [1/0] via 10.1.1.1, eth0

C>* 127.0.0.0/8 is directly connected, lo

O 192.168.12.0/24 [110/10] via 192.168.100.2, eth2, 01W1d21h

S>* 192.168.12.0/24 [1/0] via 192.168.101.2, eth1

C 192.168.12.0/24 is directly connected, eth3

O>* 192.168.23.0/24 [110/20] via 192.168.12.2, eth2 01w1d21h

vyatta@vyatta:~$

Referring to exhibit, which route will be used to forward the packet?