Free CompTIA XK0-005 Practice Exam with Questions & Answers | Set: 14

The command that will permanently resolve the issue of high CPU load and average is kill -9 6295. This command will send a SIGKILL signal to the process with the PID 6295, which is the process that is consuming 99.7% of the CPU according to the top output. The SIGKILL signal will terminate the process immediately and free up the CPU resources. The kill command is used to send signals to processes by PID or name.

The other options are not correct commands for resolving this issue. The renice -n -20 6295 command will change the priority (niceness) of the process with PID 6295 to -20, which is the highest priority possible. This will make the process more CPU-intensive, not less. The renice command is used to change the priority of running processes. The pstree -p 6295 command will show a tree of processes with PID 6295 as the root. This will not affect the CPU load or average, but only display information. The pstree command is used to display a tree of processes. The iostat -cy 1 5 command will show CPU and disk I/O statistics for 5 iterations with an interval of 1 second. This will also not affect the CPU load or average, but only display information. The iostat command is used to report CPU and I/O statistics. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 11: Troubleshooting Linux Systems; kill(1) - Linux manual page; renice(1) - Linux manual page; pstree(1) - Linux manual page; iostat(1) - Linux manual page

The commands that will list and remove the corresponding packages are dnf history and dnf history undo last. The dnf history command will display a list of all transactions performed by dnf, such as installing, updating, or removing packages. Each transaction has a unique ID, a date and time, an action, and a number of altered packages. The dnf history undo last command will undo the last transaction performed by dnf, meaning that it will reverse all package changes made by that transaction. For example, if the last transaction installed some packages, dnf history undo last will remove them.

The other options are not correct commands for listing and removing corresponding packages. The dnf list command will display a list of available packages in enabled repositories, but not the packages installed by dnf transactions. The dnf remove command will remove specified packages from the system, but not all packages from a specific transaction. The dnf info command will display detailed information about specified packages, but not about dnf transactions. The dnf upgrade command will upgrade all installed packages to their latest versions, but not undo any package changes. References: Handling package management history; dnf(8) - Linux manual page

The command rpm -qa | grep kernel lists all the installed kernel packages, and the command uname -a displays the current kernel version. These commands can help the administrator identify the correct version of the /boot/vmlinuz file, which is the kernel image file. The other options are not relevant or helpful for this task. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 8: Managing the Linux Boot Process, page 267.

The parameter net.ipv4.ip_forward=1 will accomplish the goal of setting up a new Linux server as a router. This parameter enables the IP forwarding feature, which allows the server to forward packets between different network interfaces. This is necessary for a router to route traffic between different networks. The parameter can be set in the /etc/sysctl.conf file or by using the sysctl command. This is the correct parameter to use to accomplish the goal. The other options are incorrect because they either do not exist (net.ipv4.ip_forwarding or net.ipv4.ip_route) or do not enable IP forwarding (net.ipv4.ip_forward=0). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 382.

yum install httpd

systemct1 --now enable httpd

systemct1 status httpd

netstat -tunlp | grep 80

pkill

systemct1 restart httpd

systemct1 status httpd

The command that the administrator should run NEXT to allow the file to be renamed by any user is chmod -t files. This command uses the chmod tool, which is used to change file permissions and access modes. The -t option removes (or sets) the sticky bit on a directory, which restricts deletion or renaming of files within that directory to only their owners or root. In this case, since files is a directory with sticky bit set (indicated by t in drwxrwxrwt), removing it will allow any user to rename or delete files within that directory.

The other options are not correct commands for allowing any user to rename files within files directory. The chgrp reet files command will change the group ownership of files directory to reet, but it will not affect its permissions or access modes. The chacl -R 644 files command is invalid, as chacl is used to change file access control lists (ACLs), not permissions or access modes. The chown users files command will change the user ownership of files directory to users, but it will not affect its permissions or access modes. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 8: Managing Users and Groups; chmod(1) - Linux manual page

The administrator should do the following two actions to resolve the issue:

Boot the system on a LiveCD/ISO. This is necessary to access the system and repair the boot loader. A LiveCD/ISO is a bootable media that contains a Linux distribution that can run without installation. The administrator can boot the system from the LiveCD/ISO and mount the root partition of the system to a temporary directory, such as /mnt.

Execute grub-install /dev/sdX and reboot. This will reinstall the GRUB boot loader to the disk device, where sdX is the device name of the disk, such as sda or sdb. The GRUB boot loader is a program that runs when the system is powered on and allows the user to choose which operating system or kernel to boot. The issue is caused by a corrupted or missing GRUB boot loader, which prevents the system from booting. The command grub-install will restore the GRUB boot loader and fix the issue.

The other options are incorrect because they either do not fix the boot loader (interrupt the boot process in the GRUB menu or fix the partition modifying /etc/default/grub) or do not use the correct syntax (grub-install --root-directory=/mnt instead of grub-install /dev/sdX or rescue or single instead of recovery in the GRUB menu). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 8: Managing the Linux Boot Process, pages 265-266.

The command ssh-copy-id user@server will allow the user to upload the public key to a remote server and enable passwordless login. The ssh-copy-id command is a tool for copying the public key to a remote server and appending it to the authorized_keys file, which is used for public key authentication. The command will also set the appropriate permissions on the remote server to ensure the security of the key. The command ssh-copy-id user@server will copy the public key of the user to the server and allow the user to log in without a password. This is the correct command to use for this task. The other options are incorrect because they either do not copy the public key (scp, rsync, or ssh-add) or do not use the correct syntax (scp ~/.ssh/id_rsa user@server:~/ instead of scp ~/.ssh/id_rsa.pub user@server:~/ or rsync ~ /.ssh/ user@server:~/ instead of rsync ~/.ssh/id_rsa.pub user@server:~/). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 13: Managing Network Services, page 410.

The user has the wrong shell assigned to the account, which is causing the issue. The output 1 shows that the user’s shell is set to /bin/false, which is not a valid shell and will prevent the user from logging in. The output 2 shows that the user’s home directory has the correct permissions (drwxr-xr-x), and the output 3 shows that the user entered the correct password and was accepted by the SSH daemon, but the session was closed immediately due to the invalid shell. The other options are incorrect because they are not supported by the outputs. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 13: Managing Network Services, page 413.

The command that would ensure the server is set to runlevel 5 is systemct1 isolate graphical.target. This command will change the current target (or runlevel) of systemd to graphical.target, which is equivalent to runlevel 5 in SysV init systems. Graphical.target means that the system will start with a graphical user interface (GUI) and all services required for it.

The other options are not correct commands for setting the server to runlevel 5. The systemct1 isolate multi-user.target command will change the current target to multi-user.target, which is equivalent to runlevel 3 in SysV init systems. Multi-user.target means that the system will start with multiple user logins and networking, but without a GUI. The systemct1 isolate network.target command will change the current target to network.target, which is not a real runlevel but a synchronization point for network-related services. Network.target means that network functionality should be available, but does not specify whether it should be started before or after it. The systemct1 isolate basic.target command will change the current target to basic.target, which is also not a real runlevel but a synchronization point for basic system services. Basic.target means that all essential services should be started, but does not specify whether it should be started before or after it. References: systemd System and Service Manager; systemd.special(7) - Linux manual page