Free CompTIA XK0-005 Practice Exam with Questions & Answers | Set: 13

The list of commands in option D is the correct way to achieve the goal. The commands are as follows:

fallocate -l 1G /ops/app.img creates a 1GB file named app.img under the /ops directory.

mkfs.xfs /ops/app.img formats the file as an XFS filesystem.

mount -o loop /ops/app.img /ops/app mounts the file as a loop device under the /ops/app directory. The other options are incorrect because they either use the wrong commands (dd or truncate instead of fallocate), the wrong options (-t or -f instead of -o), or the wrong order of arguments (/ops/app.img /ops/app instead of /ops/app /ops/app.img). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 10: Managing Storage, pages 323-324.

The command docker cp container_id:/deployment.yaml deployment.yaml can accomplish the task of copying the file deployment.yaml from a container to the host. The docker command is a tool for managing Docker containers and images. The cp option copies files or directories between a container and the local filesystem. The container_id is the identifier of the container, which can be obtained by using the docker ps command. The /deployment.yaml is the path of the file in the container, which must be preceded by a slash. The deployment.yaml is the path of the file on the host, which can be relative or absolute. The command docker cp container_id:/deployment.yaml deployment.yaml will copy the file deployment.yaml from the container to the current working directory on the host. This is the correct command to use to accomplish the task. The other options are incorrect because they either use the wrong syntax (docker cp container_id/deployment.yaml deployment.yaml or docker cp container_id/deployment.yaml local://deployment.yaml) or do not exist (docker cp deployment.yaml local://deployment.yaml). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 19: Managing Cloud and Virtualization Technologies, page 567.

Podman exec -ti app /bin/sh allows the Linux administrator to enter the running container and analyze the logs that are stored inside. This command uses the podman tool, which is a daemonless container engine that can run and manage containers on Linux systems. The exec option executes a command inside an existing container, in this case app, which is the name of the container that runs the failing application. The -ti option allocates a pseudo-TTY and keeps STDIN open, allowing for interactive shell access to the container. The /bin/sh argument specifies the shell command to run inside the container, which can be used to view and manipulate the log files.

The other options are not correct commands for entering a running container and analyzing the logs. Docker run -ti app /bin/sh creates a new container from the app image and runs the /bin/sh command inside it, but does not enter the existing container that runs the failing application. Podman run -d app /bin/bash also creates a new container from the app image and runs the /bin/bash command inside it, but does so in detached mode, meaning that it runs in the background without interactive shell access. Docker exec -d app /bin/bash executes the /bin/bash command inside the existing app container, but also does so in detached mode, without interactive shell access.

The command that will accomplish this task is sudo useradd -e 2021-09-30 Project_user. This command will create a new user account named Project_user with an expiration date of 2021-09-30. The -e option of useradd specifies the date on which the user account will be disabled in YYYY-MM-DD format.

The other options are not correct commands for creating a user account with an expiration date. The sudo useradd -c 2021-09-30 Project_user command will create a new user account named Project_user with a comment of 2021-09-30. The -c option of useradd specifies a comment or description for the user account, not an expiration date. The sudo modinfo -F 2021-09-30 Project_user command is invalid because modinfo is not a command for managing user accounts, but a command for displaying information about kernel modules. The -F option of modinfo specifies a field name to show, not an expiration date. The sudo useradd -m -d 2021-09-30 Project_user command will create a new user account named Project_user with a home directory of 2021-09-30. The -m option of useradd specifies that the home directory should be created if it does not exist, and the -d option specifies the home directory name, not an expiration date. References: useradd(8) - Linux manual page; modinfo(8) - Linux manual page

The file /etc/ssh/sshd_config contains the configuration settings for the SSH daemon, which handles the secure remote login. To change the port number, the engineer should edit this file and modify the line that says Port 22 to Port 49000. The other files are not related to the SSH service. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 13: Managing Network Services, page 411.

The administrator can use the following two options to boot the system into the single user mode:

Interrupt the boot process in the GRUB menu and add systemd.unit=rescue.target in the kernel line. This option will boot the system into the rescue mode, which is a minimal environment that allows the administrator to perform basic tasks such as repairing the system. The GRUB menu is a screen that appears when the system is powered on and allows the administrator to choose which kernel or operating system to boot. The kernel line is a line that specifies the parameters for the kernel, such as the root device, the init system, and the boot options. The administrator can interrupt the boot process by pressing the e key in the GRUB menu and edit the kernel line by adding systemd.unit=rescue.target at the end. This option will tell the system to use the rescue target, which is a unit that defines the state of the system in the rescue mode. The administrator can then press Ctrl+X to boot the system with the modified kernel line. This option will boot the system into the single user mode and allow the administrator to troubleshoot the issues.

Interrupt the boot process in the GRUB menu and add systemd.unit=single.target in the kernel line. This option will boot the system into the single user mode, which is a mode that allows the administrator to log in as the root user and perform maintenance tasks. The GRUB menu and the kernel line are the same as the previous option. The administrator can interrupt the boot process by pressing the e key in the GRUB menu and edit the kernel line by adding systemd.unit=single.target at the end. This option will tell the system to use the single target, which is a unit that defines the state of the system in the single user mode. The administrator can then press Ctrl+X to boot the system with the modified kernel line. This option will boot the system into the single user mode and allow the administrator to troubleshoot the issues.

The other options are incorrect because they either do not boot the system into the single user mode (execute the following command from the GRUB rescue shell: mount -o remount, ro/sysroot or interrupt the boot process in the GRUB menu and add systemd.unit=single in the kernel line) or do not use the correct syntax (interrupt the boot process in the GRUB menu and add single=user in the kernel line or interrupt the boot process in the GRUB menu and add init=/bin/bash in the kernel line). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 8: Managing the Linux Boot Process, pages 267-268.

The command that will accomplish the goal of avoiding the deletion or modification of files from non-owners is chmod +t /project/access2all. This command will set the sticky bit on the directory /project/access2all, which is a special permission that restricts file deletion or renaming to only the file owner, directory owner, or root user. This way, even if multiple users have write permission to the directory, they cannot delete or modify each other’s files.

The other options are not correct commands for accomplishing the goal. The chmod +rws /project/access2all command will set both the SUID and SGID bits on the directory, which are special permissions that allow a program or a directory to run or be accessed with the permissions of its owner or group, respectively. However, this does not prevent file deletion or modification from non-owners. The chmod 2770 /project/access2all command will set only the SGID bit on the directory, which means that any new files or subdirectories created in it will inherit its group ownership. However, this does not prevent file deletion or modification from non-owners. The chmod ugo+rwx /project/access2all command will grant read, write, and execute permissions to all users (user, group, and others) on the directory, which means that anyone can delete or modify any file in it. References: chmod(1) - Linux manual page; How to Use SUID, SGID, and Sticky Bits on Linux

The administrator should use the command df -i /oracle1 to diagnose the issue of users being unable to write data to the /oracle1 directory. This command will show the inode usage of the /oracle1 filesystem, which indicates how many files and directories can be created on it. If the inode usage is 100%, it means that no more files or directories can be added, even if there is still free space on the disk. The administrator can then delete some unnecessary files or directories, or increase the inode limit of the filesystem, to resolve the issue.

The other options are not correct commands for diagnosing this issue. The fdisk -l /dev/sdb1 command will show the partition table of /dev/sdb1, which is not relevant to the inode usage. The lsblk /dev/sdb1 command will show information about /dev/sdb1 as a block device, such as its size, mount point, and type, but not its inode usage. The du -sh /oracle1 command will show the disk usage of /oracle1 in human-readable format, but not its inode usage. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 7: Managing Disk Storage; How to Check Inode Usage in Linux - Fedingo

The command that will help the administrator install GRUB on the legacy MBR of the SATA hard drive is grub-install /dev/sda. This command will install GRUB on the master boot record (MBR) of the first SATA disk (/dev/sda). The MBR is the first sector of a disk that contains boot code and a partition table. GRUB will overwrite the boot code and place its own code that can load GRUB modules and configuration files from a specific partition.

The other options are not correct commands for installing GRUB on the legacy MBR of the SATA hard drive. The grub-install /dev/hda command will try to install GRUB on the first IDE disk (/dev/hda), which may not exist or may not be bootable. The grub-install /dev/sr0 command will try to install GRUB on the first SCSI CD-ROM device (/dev/sr0), which is not a hard drive and may not be bootable. The grub-install /dev/hd0,0 command is invalid because grub-install does not accept partition names as arguments, only disk names. References: Installing GRUB using grub-install; GRUB Manual

The most probable cause of the connectivity issue is that the network interface cable is not connected to a switch. This can be inferred from the output of the ip link list dev eth0 command, which shows that the network interface eth0 has the NO-CARRIER flag set. This flag indicates that there is no physical link detected on the interface, meaning that the cable is either unplugged or faulty. The other options are not valid causes of the issue. The address ac:00:11:22:33:cd is a valid Ethernet address, as it follows the format of six hexadecimal octets separated by colons. The Ethernet broadcast address should be ff:ff:ff:ff:ff:ff, which is the default value for all interfaces. The network interface eth0 is not using an old kernel module, as it shows the UP flag, which indicates that the interface is enabled and ready to transmit data. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 14: Managing Networking