Free CompTIA SK0-005 Practice Exam with Questions & Answers | Set: 14

1U stands for one unit and it is a standard unit of measurement for rack-mounted servers. It is equal to 1.75 inches (4.45 cm) in height. A 42U rack can accommodate 42 1U servers or a combination of servers with different unit sizes. Therefore, the unit size per server should be 1U if there are 19 1U servers in a 42U rack.References: https://www.comptia.org/training/resources/exam-objectives/comptia-server-sk0-005-exam-objectives (Objective 1.2)

The chmod command is used to change the permissions of files and directories. The g+w option means to grant write permission to the group owner of the file. Since Joe is a member of the IT group, which is also the group owner of the file, this command will allow him to save changes to the file without affecting the permissions of other users. Verified References: [Linux chmod command]

Since both drives are in different RAID 1 arrays and both are hot-swappable, the most efficient step is to replace both failed drives at the same time. This can minimize the downtime and avoid unnecessary reboots. RAID 1 provides mirroring, which means that data is duplicated on both drives in the array. Therefore, replacing one drive will not affect the data on the other drive or the functionality of the array.References:https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_1

This is the most likely cause of the issue because the keyboard LED flash indicates a POST error code. If the display card is not initialized, the system cannot show any error messages on the screen and will stop booting. References:https://www.computerhope.com/beep.htm#04

The port that must remain open for a secure website is port 443. Port 443 is used by Hypertext Transfer Protocol Secure (HTTPS), which is an extension of HTTP that encrypts and authenticates the communication between a web server and a web browser. HTTPS ensures that the data transmitted over the web is protected from eavesdropping, tampering, or spoofing. Therefore, port 443 must remain open for a secure website to function properly.

A sniffer is a tool that captures and analyzes network traffic on a subnet or a network interface. It can help identify the source, destination, protocol, and content of the traffic and detect any anomalies or issues on the network. Verified References: [Sniffer], [Network traffic]

A single-threaded application is an application that can only execute one task or process at a time. A single-threaded application can only utilize one CPU core, regardless of how many cores are available or assigned to the virtual machine. Therefore, adding more vCPU cores to the VM will not improve the performance of the application, as it will still be limited by the speed and capacity of one core12.

To troubleshoot this issue, the administrator should check if the application is single-threaded or multi-threaded. This can be done by using tools such as Task Manager, Performance Monitor, or Process Explorer on Windows, or top, htop, or ps on Linux34. If the application is single-threaded, the administrator should consider the following options:

Reduce the number of vCPU cores on the VM to match the number of threads that the application can use. This can help avoid CPU contention and co-stop issues that may arise from having too many vCPUsrelative to the number of physical cores on the host5.

Upgrade the physical CPU on the host to a faster or newer model that can provide higher clock speed and performance for the single core that the application uses.

Optimize the application code or configuration to make it more efficient or multi-threaded, if possible. This can help the application take advantage of multiple cores and improve its performance.

The most likely cause of the issue is that the disk uses GPT.GPT stands for GUID Partition Table, which is a newer standard for disk partitioning that supports larger disks and more partitions than theolder MBR (Master Boot Record) standard1.However, GPT is not compatible with some older operating systems, such as Windows XP or Windows Server 20032. Therefore, if the data drive was formatted with GPT on a new Windows server and then moved to an older Windows server, the older server may not be able to recognize the GPT partitions and access the data on the drive.

The partition being formatted with ext4, FAT32, or MBR are not likely causes of the issue.Ext4 is a file system that is commonly used on Linux-based systems, but it can also be read by Windows with some third-party software3.FAT32 is a file system that is widely compatible with most operating systems and devices, but it has some limitations such as a maximum file size of 4 GB and a maximum partition size of 8 TB4.MBR is not a file system, but a partitioning scheme that can support various file systems such as NTFS, FAT32, or exFAT5.However, MBR has some disadvantages compared to GPT, such as a maximum disk size of 2 TB and a maximum number of primary partitions of four1.

An incremental backup only backs up files that have changed since the last backup, whether it was a full or an incremental backup. Therefore, an incremental backup file may require another file to restore data, depending on the sequence of backups. A full backup backs up all files and does not require any other file to restore data. A snapshot is a point-in-time copy of data that does not depend on other files. A differential backup backs up files that have changed since the last full backup and does not require any other file to restore data.

Robocopy (Robust File Copy) is a command-line tool that can copy files and folders between Windows servers or computers. It has many features and options that can ensure all the data is copied consistently, such as retrying failed copies, resuming interrupted copies, copying permissions and attributes, mirroring source and destination directories, and logging the copy progress and results. Verified References: [Robocopy], [File copy]