Free CompTIA SK0-005 Practice Exam with Questions & Answers | Set: 12

RAID 6 is a type of RAID level that uses two parity blocks to provide fault tolerance and redundancy for data storage. RAID 6 can withstand the failure of up to two disks in the array without losing any data. RAID 6 requires a minimum of four disks to operate, and it distributes the data and parity blocks across all the disks in the array. RAID 6 has a high write penalty, which means that it takes more time and resources to write data to the disks than to read data from them. However, RAID 6 offers a highlevel of data protection and reliability, which makes it suitable for applications that require high availability and durability1.

RAID 1 provides redundancy and fault tolerance by mirroring the data from one disk to another disk. RAID 1 offers high read performance and data security, but it has low capacity and write performance. RAID 1 requires a minimum of two disks to operate, and it can only tolerate the failure of one disk in the array. If more than one disk fails, all the data in the array is lost2.

RAID 5 provides redundancy and fault tolerance by using one parity block to store information that can be used to reconstruct the data in case of a disk failure. RAID 5 requires a minimum of three disks to operate, and it distributes the data and parity blocks across all the disks in the array. RAID 5 offers a balance between performance, capacity, and data protection, but it can only tolerate the failure of one disk in the array. If more than one disk fails, all the data in the array is lost2.

Therefore, among these options, RAID 6 is the best solution for creating a data volume out of four disks with the most redundancy.

This is the best command to find out which commands can be used by a user with sudo privileges because it lists the allowed and forbidden commands for a given user or role. The -l option stands for list, and the -U option specifies the user name. The output of this command will show what commands can be executed with sudo by that user on that server.References:https://www.sudo.ws/man/1.8.13/sudo.man.html

The user has likely fallen victim to a phishing scam, which is a fraudulent attempt to obtain sensitive information, such as passwords, by disguising as a legitimate entity. The link in the email that required the user to change the account password was probably a fake website that mimicked the company’s external database, and captured the user’s credentials when they entered them. This could compromise the security and integrity of the company’s data, as well as the user’s identity and privacy12.

The company should take immediate action to prevent further damage and investigate the incident. The first step is to disable the user’s account and inform the security team. Disabling the user’s account can prevent unauthorized access to the external database by the attackers, who may use the stolen credentials to log in and manipulate or steal data. Informing the security team can alert them of the breach and allow them to take appropriate measures, such as scanning for malware, changingpasswords, notifying other users, and reporting the incident34.

The first thing that a technician should verify before decommissioning and wiping a file server is non-utilization, which means that no one is using or accessing the server or its data. This can be done by checking logs, monitoring network traffic, or contacting users or stakeholders. Non-utilization ensures that decommissioning and wiping will not cause any data loss or disruption to business operations. Verified References: [Server Decommissioning Checklist]

This is the most likely cause of preventing the users from accessing the application server because a VLAN is a logical segmentation of a network that isolates traffic based on certain criteria. If the human resources department and the application server are on different VLANs, they will not be able to communicate with each other unless there is a router or a switch that can route between VLANs.References:https://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41860-howto-L3-intervlanrouting.html

The BIOS (Basic Input/Output System) is a firmware that controls the initialization and booting of a server. It also provides settings for the CPU, such as speed, voltage, and temperature. Updating the BIOS can improve the performance and compatibility of the CPU and other hardware components. Verified References: [BIOS], [CPU]

Blanking panels are metal or plastic plates that are installed in the empty spaces of a rack to prevent hot air from recirculating back to the front of the rack. This can improve the airflow and cooling efficiency of the rack and reduce the heat generated by the servers. Verified References: [Blanking panel], [Rack cooling]

RTO (Recovery Time Objective) is a metric that measures how much downtime an organization can tolerate during an unplanned outage before it affects its business continuity and reputation. RTO is usually expressed in hours or minutes and is determined by the criticality of the business processes and the impact of the outage on the revenue, customers, and stakeholders. RTO helps to define the recovery strategy and the resources needed to restore the normal operations as quickly as possible. Verified References: [RTO vs RPO]

This is the best description of a synthetic full backup method because it creates a full backup by combining previous incremental backups with the latest backup. An incremental backup copies only the files that have changed since the last backup, while a full backup copies all the files. A synthetic full backup reduces the storage space and network bandwidth required for backups, while also simplifying the restore process by using a single file.References:https://www.veritas.com/support/en_US/doc/129705091-129705095-0/br731_wxrt-tot_v131910378-129705095

Option D is the best practice to set up Ann’s permissions correctly, exposing only the minimum rights required. Option D shows that the share permissions on the DATA folder grant Ann Change access, which allows her to read, write, and delete files in the shared folder. The file permissions grant Ann Modify access, which allows her to read, write, execute, and delete files in the folder. This combination of permissions gives Ann the ability to write anything to the DATA folder using the network, as well as to modify and delete existing files. This meets the requirement of giving Ann modify permissions to the shared folder.