Free CompTIA N10-009 Practice Exam with Questions & Answers | Set: 3

A UPS (Uninterruptible Power Supply) provides backup power to devices during a power outage, allowing for continuous operation and protecting against sudden shutdowns that could cause data loss or equipment damage. The document confirms:

“A UPS (Uninterruptible Power Supply) is essential for maintaining power to critical devices during an outage, protecting data and ensuring continuous operation until power is restored or a safe shutdown can be performed.”

Band steering allows wireless access points to automatically direct capable devices to the 5GHz band, which typically has higher throughput and less interference than the 2.4GHz band, improving performance. The document confirms:

“Band steering helps balance wireless client loads by steering dual-band capable devices to the 5GHz band, which offers higher speeds and less channel congestion than 2.4GHz.”

Understanding Switches:

Layer 2 (Data Link Layer): Traditional switches operate primarily at Layer 2, where they use MAC addresses to forward frames within a local network.

Layer 3 (Network Layer): Layer 3 switches, also known as multilayer switches, can perform routing functions using IP addresses to forward packets between different networks.

Capabilities of Multilayer Switches:

VLANs and Inter-VLAN Routing: Multilayer switches can handle VLAN (Virtual Local Area Network) configurations and perform inter-VLAN routing, enabling communication between different VLANs.

Routing Protocols: They can run routing protocols like OSPF (Open Shortest Path First) and EIGRP (Enhanced Interior Gateway Routing Protocol) to manage traffic between networks.

Comparison with Other Devices:

Hub: Operates only at Layer 1 (Physical Layer) and simply repeats incoming signals to all ports.

Transceiver: Also operates at Layer 1, converting electrical signals to optical signals and vice versa.

Modem: Primarily operates at Layer 1 and Layer 2, modulating and demodulating signals for transmission over different types of media.

Practical Application:

Multilayer switches are commonly used in enterprise networks to optimize performance and manage complex routing and switching requirements within a single device.

TheSession Layer(Layer 5 of the OSI Model) is responsible for setting up, managing, and tearing down sessions between applications. It maintains dialog control and synchronizes data exchange between systems.

This is an example of Multi-Factor Authentication (MFA) because it requires:

Something you know (username/password)

Something you have (a phone-generated passcode)

Breakdown of Options:

A. SSO (Single Sign-On) – Allows one login for multiple services, but does not add a second authentication factor.

B. LDAP (Lightweight Directory Access Protocol) – Used for directory authentication, not MFA.

C. MFA (Multi-Factor Authentication) – ✅ Correct answer. Uses multiple authentication factors for better security.

D. SAML (Security Assertion Markup Language) – Used for federated identity management, not multi-factor authentication.

A jump box is a hardened system that provides secure access to isolated or sensitive devices on a separate network.

Breakdown of Options:

A. Jump box – ✅ Correct answer. Acts as a middle point for secure remote access.

B. API gateway – Used for managing API calls, not remote access to isolated devices.

C. Secure Shell (SSH) – Requires direct connectivity, which may not be available for an isolated device.

D. Clientless VPN – Allows web-based VPN access, but does not guarantee access to isolated devices.

Port mirroring, also known as SPAN (Switched Port Analyzer), is used to send a copy of network packets seen on one switch port (or an entire VLAN) to another port where the IDS is connected. This allows the IDS to passively inspect network traffic without interfering with the actual traffic flow. Port mirroring is an essential feature for implementing IDS in a network for traffic analysis and security monitoring.References: CompTIA Network+ study materials.

802.1Q tagging, also known as VLAN tagging, is used to identify VLANs on a trunk link between switches. This allows the switches to transfer data for multiple VLANs (or networks) over a single physical connection. This method ensures that traffic from different VLANs is properly separated and managed across the network.References: CompTIA Network+ study materials.

To support VoIP on a network with limited switchports, the engineer should configure voice VLANs and enable 802.1Q tagging. Voice VLANs allow VoIP traffic to be prioritized and isolated from data traffic even when sharing the same physical port. 802.1Q is used for VLAN tagging, enabling multiple VLANs over a single physical link.

From Andrew Ramdayal’s guide:

“Voice VLANs allow IP phones and computers to share the same physical switch port while keeping their traffic separate. 802.1Q is used to tag VLAN traffic so that it can be appropriately routed and prioritized.”